Viking Oceangoing Trading Ship
$4.00 Viking Oceangoing Trading Ship
3D
Published 2021-07-19T08:52:00+00:00
Ever wondered how duke William's cavalry made it across the english channel ? Certainly not on a classic longship of the time, which had a needle shape with very little room for anything but the crew.
This probably would have been the kind of ship that they used. To be quite honest, I had modeled the ship largely because I had wanted to find out how many 1:72 scale horses I could fit inside !
This scale model complements my previous smaller viking trading ship model in 1:72 scale. Like the free small viking warship, you can print it on a 22x22cm plate in its original scale by placing it diagonally on your printing plate. This model includes smooth hull planks and a proper rudder. Also, there now are holes drilled into some of the ribs to accomodate any rigging that you may want to add, which is a whole lot more realistic than the pegs that I had put on my earlier ships. Some blocks for the rigging are also included, they print out OK on a FDM printer at standard settings as long as you dont reduce the scale. If you try to reduce the blocks to smaller size, you will need to use a resin printer.
All of my earlier ship models here will now be updated to this new standard of quality/historical accuracy during the coming month, so that when you print them out now they will fit right in with this new model. Enjoy !
Update 20.07.2021: After printing a few of these models at reduced scale, I have now updated both the hull and the stand files slightly.
Update 15.08.2021: Added a version that actually has the openings for some oars (Version A)!
Update 21.02.2021: Added a waterline version of Model A, also slight improvements on benches in the main version.
.
To print, place diagonally on the plate. Use a light supports setting - removing these later will be the quite tedious and they unfortunately do rough up the underside of the hull. I am preparing two half-hulls that can be printed vertically which should then give a cleaner result. The printout in the picture is PLA, 0.4mm nozzle, 0.15mm layer size and takes 14 hours.
| 发表的日期 | 19/07/2021 |
| Price | $4.00 |
| 让时间去下载 | 720 - 分钟 |
| 尺寸大小 | 230x75x170mm |