As requested, these are similar to my Wu Ying sandals but without the drawer. I printed these with wood filament and then sanded and finished them. Pictures of that are here: http://imgur.com/a/uAFjf
They are certainly wearable- at least as much as any store bought sandals the same height. Short video of them being worn here: http://sendvid.com/jkiis66m
You can edit the file on TinkerCad here: https://tinkercad.com/things/gU8pC4ZNky4
Remember to “ungroup" the strap-holes before you resize it. Also by scaling on the Z axis alone you can lower them to a height you are comfortable with. After you are happy with the changes use the "Mirror" function to make the left shoe.
Wood filament .3 layer height, 20% infill but I would suggest .2 since it took forever to sand.
Sanded with 180, 240, 320, 400 and 600 grit sandpaper. Then finished. Two coats. Three would probably be better.
If you like this and want to see more of my projects, or a bit of my life in Shenzhen, China you can look here:
►My Photo Albums: http://sexycyborg.imgur.com
►My FAQ: http://pastebin.com/V3474kYs