Rheahs's Print of Airship - Geshtar Class Dreadnought
Community Print 3D Print of Airship - Geshtar Class Dreadnought
Published 2022-02-09T11:21:44+00:00
2
3
Printed on: Creality CR-10S Pro
Material: PLA
Description
Finished my Geshtar 100% scaled dreadnaught. Printed mostly with Polymaker Polylite PLA on:
- RatRig V-Core 3 400mm
- Creality CR10S Pro + Hemera
- Prusa Mini
When the RatRig build completed the print time jumped forward to finishing about 1.3 parts/day. In total it took me about 2 months.
Bottom mounted crystals were printed in Colorfabb Gray/Blue and Basf Ultrafuse; I did some splitting on the STL's to print it 2-colour on single extruder printers. To fix 'cannon droop' I intend to print some TPU friction pads. Printed the medium cuts; could in theory have printed 4 parts at a time on the RatRig but stuck to 1.