Montini Diana Goddess of the Ocean Wall Set (Lego Compatible)
Montini Diana Goddess of the Ocean Wall Set (Lego Compatible)
3D
Published 2020-02-01T11:35:12+00:00 • Remixed from Diana as Goddess of the Ocean, Montini building bricks Two Pip Set (Lego Compatible), Montini building bricks One Pip Set (Lego Compatible), Montini building bricks Pip Strip Set (Lego Compatible)
This set of Montini bricks forms a wall with a relief made from a clay tablet scan called, "Diana as Goddess of the Ocean". This relief depicts Diana, the goddess of hunt and animals, shown in a more oceanic setting with two fish or dolphins by her feet. It was modeled for a relief for the city of Amsterdam.
Just like the vintage original Montini parts, these are compatible with classic Lego full height bricks.
Montini building bricks were produced from 1961 to 1969 in the Netherlands. They were originally made from soft, pliable polypropylene. The diagonal fins bend slightly around the pips of the other block.
puppenhausmuseum.de/montini-bausteine.html
Please do not mix these with original Montini parts. PLA is much harder than the original bricks, and the layer ridges act like sand paper. You will wear out the original Montini bricks very quickly.
I would love to see your make!
Original art scan:
www.myminifactory.com/object/3d-print-diana-as-goddess-of-the-ocean-69448
These are optimized for a 0.4mm nozzle. They are friction fit parts, so tolerances are important.
I set the Horizontal Shells Top to 7, and Bottom to 10 to allow for the relief to have infill, but the brick to be solid.
These bricks need supports on the relief portion. The bricks themselves do not need supports:
0_3_Diana.stl
0_4_Diana.stl
0_8_Diana.stl
0_9_Diana.stl
1_1_Diana.stl
1_3_Diana.stl
1_5_Diana.stl
1_6_Diana.stl
1_7_Diana.stl
| Date published | 01/02/2020 |