1/87 H0-Scale Trailer for VW T1 german "Feuerwehr" Bulli
1/87 H0-Scale Trailer for VW T1 german "Feuerwehr" Bulli
3D
Published 2020-03-23T10:30:13+00:00
*Note: this object is very small, it comes in h0 scale, which is 1:87. See printing tips section! You may change its size in your slicer.*
This is a small trailer for a mobile water pump which was used by the german "Feuerwehr" (=fire fighters) in former times.
It was often pulled by the typical fire engine for smaller villages in germany in the 50s, 60s and the seventies, which was the volkswagen transporter T1.
I tow it with my Carson 1/87 RC digital proportional VW fire engine.
Print all the parts in 0.1mm resolution, as there is small detail. The *.stl provides two sort of rims, if you printer can not manage the ones with the holes, use the plain ones.
I used a small nail as an axle, which works perfect.
Level your bed to avoid elephant feet effect, print in 0.1mm resolution, first layer can be 0.2mm though. Then glue both halves together and glue the drawbar to the bottom.
For wheels i used some 10mm outer diameter, 4,8mm inner diameter wheels from old t-jet slotcars. Or print some out of TPU.
| Date de publication | 23/03/2020 |
| Sans support | YES |
