4 Color Prusa Head LCD Knob
4 Color Prusa Head LCD Knob
3D
Published 2019-01-03T09:10:17+00:00
Designed a four color Joseph Prusa head for the LCD control knob. The design was inspired by the PRUSA bottle opener design provided with the printer.
Sadly I don't have a more accurate flesh tone to print this with.
This is my entry for the "PimpMyOriginalPrusa" design competition.
Products used:
https://filaments.ca/?rfsn=4740568.a03b49
Note: Affiliate link above - I earn a commission from qualifying purchases at no additional charge to you just by using the links listed which helps support the channel.
To find more of my work, please check out my website: http://wrightbuilt.ca/
To download any of my own 3D designs, check out my design library: https://www.myminifactory.com/users/WrightBuilt.ca
Support me by Subscribing/Liking my YouTube channel, or by tipping me via MyMiniFactory (PayPal) here: https://www.myminifactory.com/users/WrightBuilt.ca
You can find my disclaimer here: http://wrightbuilt.ca/disclaimer-page/
Printed on a Prusa i3 Mk2.5 MMU2. Prints in about 45 min on the default 0.2 NORMAL Slic3rPE profile. The multicolor is only the first 3 layers to minimise tool changes required (10 total). Printed with Filaments.ca standard PLA Black, White, Grey, and Dark Yellow. Printed with no supports on the powder coated PEI spring steel sheet. I increased the purge volumes to prevent any bleeding of color since this is a very small print.
| Date de publication | 03/01/2019 |
| Durée d’impression | 45 - minutes |
| Sans support | YES |