Besta - Home Cinema setup
Besta - Home Cinema setup
3D
Published 2018-06-11T10:00:02+00:00
Hi everyone,
I created foots to print between the the Besta furniture and the glass.
It's allow me put there my old amplifier and a some more electronics.
To get it right you will need :
x1 besta Tv furniture : 691.982.68
x1 Glass cover for besta : 502.953.06
x6 foots (carefully display them on the edge and center)
x1 double tape (strong - i use 120kg double tape)
It's important to stick 4 in the corners and 2 in the middle.
The glass can take 35kg maximum. (my TV is 20kg and i have no problem)
Please adjust foot height according to your amplifier : (height of amplifier + 3cm to let the heat go)
On stl file you will find (simple foot with no writting and some with - HOME@ - MOVIE - DOLBY)
Just for fun and to show off your Home Cinema or 3d printed parts =)
Print 3 layer bottom and top
Print 3 walls
Print 30% infill minimum
| Date de publication | 11/06/2018 |
| Technologie | FDM |
| Complexité | Easy |