BLM Black Power pins
BLM Black Power pins
3D
Published 2020-06-10T22:30:20+00:00
Wear this pin to show your support for a good cause. Police brutality and racism do not belong in this world. Take a stance and show your support with this pin everywhere you go.
The model for the pin is exclusively the plastic part. The metal pins can be bought on Amazon for relatively cheap. The ones I am using are these ($9 at the time of publication). To glue the pins to the plastic parts, I am using E6000 glue which you can also find on Amazon here ($3 at the time of publication). I also recommend that you rough up both the pin and the model where you plan to put glue to increase strength.
Both the small and large pins should be printed at a 0.28mm layer height with 100% infill. Print the parts upside-down with the files labeled blmpinsymbol first then, swap the filament and print the file labeled blmpinbase overtop. If you have no experience printing this way I recommend watching this video by Devin from Make Anything.
| Date de publication | 10/06/2020 |
| Sans support | YES |