Castle Alexa
Castle Alexa
3D
Published 2019-02-28T10:10:14+00:00
I've always pictured my full sized Alexa as a castle or a rook chess piece. Finally took the opportunity to make it happen.
There are three peices to the model providing different options as pictured. I wanted the base to be separate for either the castle tower or the chess piece look.
Pic 1. Tall tower with optional base.
Pic 2. Back of tower and base showing cut out for cord(s).
Pic 3. Tall tower without base.
Pic 4. Short tower with base.
Pic 5. Short tower without base.
Supports: No for base. Yes for tower because you can't bridge a curve. To cut down on need for support, print the tower upside down.
Raft/Brim: No, unless you have lifting issues. I did not, so I didn't use a brim.
Tall tower: 117mm x 170mm x 118mm
Short tower: 117mm x 142.5mm x 118mm
Base: 128mm x 28mm x 128mm
| Date de publication | 28/02/2019 |
| Quantité de filament | ~100g each piece |
| Dimensions | See above |