Classic Space Rocket
Classic Space Rocket
Published 2018-07-07T23:12:28+00:00
Wanted to make the classic and simple rocket design that was common in childhood cartoons.
Products used:
https://filaments.ca/?rfsn=4740568.a03b49
Note: Affiliate link above - I earn a commission from qualifying purchases at no additional charge to you just by using the links listed which helps support the channel.
To find more of my work, please check out my website: http://wrightbuilt.ca/
To download any of my own 3D designs, check out my design library: https://www.myminifactory.com/users/WrightBuilt.ca
Support me by Subscribing/Liking my YouTube channel, or by tipping me via MyMiniFactory (PayPal) here: https://www.myminifactory.com/users/WrightBuilt.ca
You can find my disclaimer here: http://wrightbuilt.ca/disclaimer-page/
Grey one printed at original scale. Red one printed signifigantly larger (about 30cm tall). Both are PLA and where printed with 1 perimeter, brim, 0% infill, and only support for the bottom of the main body of the rocket. Both took 2 hours to print (grey on a Original Prusa i3 Mk2s MMU and the red on a modified printer with a 1mm volcano clone for the hotend)
Print with the fins on the hotbed pointing upwards.
Date de publication | 07/07/2018 |