Elf Bust - An experiment for separate parts
Elf Bust - An experiment for separate parts
3D
Published 2020-10-26T19:35:12+00:00
Recently my friend tasked/challenged me to make some models of local monuments since none exist online and I fell for it. So anyways I am busy making these structural models as best as I know how (I am a hobbyist designer not professional still...) so I have been busy with those. Anyways, I just saw that the models of the Ladies that I have posted are getting a lot of attention so I decided to try an experiment with separating hard to print and/or Fix parts (Hair mainly) so that I can maybe try my hand at creating more models of the "People" category. So here was the test I took a hair model for a scavenger (or hunter or rogue , whatever... its kind of like a mohawk thing.. sorry i don't know what this hairstyle is called..) that I had and decided to convert and fix the model for 3d Printing. Well it was kind of a head ache but I got it fixed and error free leaving only the print test part.
Obviously to my surprise ... IT PRINTED!!!!!!! Printed Well in-fact, just needed smart support but a lot of it and proper orientation. Now I needed some model to fit the hair to but I made a mistake of not fitting the hair to any head/person model during the design phase. I had no idea of what scale to use or how to align the models ... still I took this model of an elf and sliced away most of the body to just leave the head and have enough clearance for the hair to not make the model seem like it is floating in air.
So THIS is what I wound up with.... I did try to match, resize and align the models as well as I could and printed the elf bust but seems I was off in my assumptions as the hair does not properly fit.
Anyways here is the model for you guys to test and play with to maybe get something good made, do share your results or makes if you decide to test this. Rest assured this model is error free and totally printable just Not properly ... 'fittable'. I will conduct more tests on this concept soon as it was kind of promising, just need to complete my friend's challenge 1st :D
Good Luck :)
Orient the hair upside down and position it very slightly below the print bed so that there is just enough area for the hair to adhere to the bed as the hair ...strands.... will not properly stick to the heat bed.. maybe.. depends on machines and settings honestly. Use sufficient supports and print at a fine layer height to cover some of the overhangs. For the elf bust use supports on the chin and ears rest it prints very straight forward. I have provided an image of the models sliced so you can see how I printed them. IMPORTANT: THERE ARE THIN WALLED SEGMENTS ON THE MODELS SO I USED HORIZONTAL COMPENSATION @ +0.2 TO ENSURE THESE THIN SEGMENTS GET PRINTED PROPERLY AND MAYBE IS A REASON WHY THE PRINTS SEEM .. FULLER/THICKER. UNLESS YOU ARE USED TO PRINTING THIN PARTS WELL, DO USE THIS SETTING IN YOUR SLICER IT WILL SAVE YOU ALOT OF PAIN AND WASTED FILAMENT FOR THIS MODEL. In the images I have provided a gcode preview of how I printed the parts.... I guess that's about it, I don't think I did any more special settings to print this. But you can ask away if there is something causing problems or you are unable to get this to print. Oh ! do use a heat gun for fitting the hair to the bust as just directly pushing the hair piece on the bust may cause the weak bangs to break.. happened to my silver model in pictures :( Good Luck
| Date de publication | 26/10/2020 |