Insta360 ONE R Dummy Battery
Insta360 ONE R Dummy Battery
3D
Published 2020-04-21T19:32:54+00:00
The Insta360 ONE R is an awesome camera, but if you need to record for very long periods of time, you need to plug in USB power via the Type-C socket. With the battery connected, people have reported that their cameras have shut off after about 60-90 minutes.
This dummy battery replaces the camera's battery inside the Insta360 ONE R enclosure so that you're just powering the camera directly from USB and not constantly charging/draining the battery as well.
Update: The core module still builds up quite a lot of heat, even without the battery there, so I just uploaded a second version with a gap directly below the core module to help allow it to dissipate the heat a little better.
Printed with a 0.4mm nozzle at 0.5mm line width, 0.2mm layer height in PETG. Should take less than an hour.
| Date de publication | 21/04/2020 |
| Sans support | YES |