Kapton tape applicator
Kapton tape applicator
3D
Published 2014-11-24T18:28:48+00:00
Support free design competition
Product design
If you're like me and have zero patience when it comes to reapplying a new layer of Kapton tape to your printers print-bed. Then this handy tool will help improve on the results. Simply wrap the tape sticky-side-out around the reel and then carefully roll it onto the platform. Print time at 0.3mm layer thickness and 10% infill came to just over 3 hours. Although I would recommend a higher infill setting. Print size is 7.242 x 7.242 x 5 cm. If it doesn't work as well as you expect to, then you can always pretend it's a spaceship. Like I do. :)
Print at 0.2 mm layer height, with 10% infill. This uses 37 g of filament and takes 178 minutes.
| Date de publication | 24/11/2014 |
| Durée d’impression | 178 - 178 minutes |
| Quantité de filament | 37 g |
| Dimensions | 72x72x50 |
| Complexité | Very Easy |
| Sans support | YES |
