Kingdom Death: Phoenix Card Box
Kingdom Death: Phoenix Card Box
3D
Published 2020-11-09T10:51:02+00:00
Kingdom death: Monster (KDM). PLA connectable card boxes for transportation. This is the Phoenix quarry box.
Each box sized for the cards contained within. Can be connected and locked together for transportation.
Dividers and other boxes avaliable in Seperate STL. Design made for sleeved cards. Some spare room is avalible, to help ease of access with fingers.
Prints in images were made with PLA wood filament and post processed with wood stain. I will uploade a description of the process applied somewhere in the near future.
If there are any problems with the print please reach out and let me know. Until now only tested on my own printer (Flashforge Dreamer) with three filament types.
Discord contact: Samwise#9749
Test prints printed on Flash Forge Dreamer
Tested with Sunlu, Formfutura wood filament and flashforge standard PLA. The higher the wood content the easier to post process but the less robust the print is. Note: Thin walls can become a challenge with high wood content.
*Width of box varies depending on cards to be held. 75 mm is the width for Phoenix (approx). All boxes printed and tested with sleeves cards.
| Date de publication | 09/11/2020 |
| Durée d’impression | 500 - 501 minutes |
| Quantité de filament | 95 gram |
| Sans support | YES |