Magnetic Drip Tray
Magnetic Drip Tray
3D
Published 2019-11-05T19:35:48+00:00
This drip tray was designed to match the general design of a 1950's GE Refridgerator. With a couple of high-power magnets glued into the recess in the back, it securely attaches to the fridge. It was made to fit under two faucets, which are ~70mm apart, center-to-center.
In order to make the inside watertight, a thin coat of epoxy can be applied.
After using the pictured print for a while, I found that more of the surface should be mesh to account for shorter faucets. The included files have been adjusted accordingly.
The drip tray can be printed inverted with minimum support.
The mesh insert was printed with 0 top and bottom layers to expose the infill, which was 15% gyroid.
| Date de publication | 05/11/2019 |