MINI Cooper Key Fob Trim Ring
MINI Cooper Key Fob Trim Ring
3D
Published 2017-06-28T09:48:02+00:00
Summary
My wife wanted a different color trim ring for her MINI Cooper key fob, so I went into Fusion 360 and came up with this! Now you can add some color to your key fob. Print one in your favorite color, or one to match the color of your car.
Disclaimer: They do not grip the key fob as tightly as the original. You may need to add a little adhesive to keep it secured (would NOT recommend super glue, unless you want it to be permanent). I have not added any adhesive and after a few days of use, it hasn't fallen off.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2mm or lower
Infill:
100%
Notes:
Best results when printed with .2mm layer height or lower. I would also recommend a .4mm nozzle or smaller. At the thinnest point of the model, the walls are .4mm thick.
The ones pictured are printed at .1mm layer heights with an initial layer height of .2mm with a .4mm nozzle.
| Date de publication | 28/06/2017 |
| Durée d’impression | - 15 minutes |
| Quantité de filament | 1 |
| Technologie | FDM |
| Complexité | Very Easy |
| Sans support | YES |
