Multi-part Headphone Stand 2
Multi-part Headphone Stand 2
3D
Published 2018-11-05T10:42:10+00:00
Want to print yourself a headphone stand? Can't do so because your build volume is too small? Well you've come to the right place! This stand is one of three specifically designed to be printed in multiple parts, and assembled after printing. This design is connected by dovetail joints with a 0.4 mm clearance.
Each print was designed to fit into the 12 x 14 x 13 cm build volume of an iMakr STARTT. Some prints do have a pretty snug fit, but mind the size of your build plate adhesion structure, and it should work.
I'm doing this for a school project, so please leave comments and feedback.
Material: PLA
Profile: Fine - 0.2 mm
Layer Height: 0.2 mm
Wall Thickness: 1.2 mm
Top/Bottom Thickness: 1.2 mm
Infill Density: 20%
| Date de publication | 05/11/2018 |