Nexus 5 Car holder with integrated Qi charger
Nexus 5 Car holder with integrated Qi charger
3D
Published 2014-11-15T13:50:44+00:00
This is a wireless charging car dock for an LG Google Nexus 5.
You will also need: Suction base off a generic car holder with 4 claw type conenction.
3x felt pads or similar padding
QI charging base (70mm dia, 10mm thick)
It is designed to fit on the industry standard suction bases on most car holders that have a snap fit 4 claw grip between the base and the actual claw (3 out of 3 bases I tried fitted perfectly)) It has a recess to take a QUMOX Qi Charging module (any 70mm dia x 10mm thick QI base will work). The holder is designed to take 5mm self adhesive felt pads on each claw to prevent scratching your phone. If you are using a case with your phone, you will only require a pad on the side claw.
Print at 0.2 mm layer height, with 10 % infill. This uses 25 g of filament and takes 125 minutes.
| Date de publication | 15/11/2014 |
| Durée d’impression | 120 - 150 minutes |
| Quantité de filament | 25g |
| Dimensions | 80mm x 150mm x 24mm |
| Complexité | Medium |
