raspberry pi outdoor webcam
1,532
views
36
downloads
Community Prints
Add your picture
Soyez le premier à partager une photo de l'impression de cet objet
0 comments
Loading comments... 
raspberry pi outdoor webcam
3D
Published 2020-05-01T21:03:44+00:00
6
0
Add to Collection
Description
this is a case for an outdoor ip camera based on a raspberry pi zero w and a raspberry pi camera v2.1.
the case is splash-proof and can therefore be left outside in the rain. to this end a plastic or glass window has to be glued to the front of the topcover.
Licence
Détail de l'impression
most components can be printed without support, except for the topcover.
the assembly is as follows:
- glue window to topcover
- glue innercase to topcarrier
- glue three m3 bolts into the bottomcarrier
- use waterproof double sided adhesive to attach the bottomcarrier to a flat surface
- place the raspberry pi zero and the camera into the innercase
- place the topcarrier - innercase assembly onto the bottomcarrier and fasten it with m3 nuts. if the camera is not level, place washers where needed.
- connect the micro usb cable to the raspberry pi.
- place the topcover over the innercase and secure it with three short m3 bolts.
- run your favorite webcam software or program something yourself.
Technical Information
| Date de publication | 01/05/2020 |
More Information
Object Parts