I will list the info by the .stl file names.

these are just the settings I used and are to be used as a guide, feel free to use whatever settings you wish.

Slicer software: Slic3r

Printer: Original Prusa i3 MK2

(just about any printer should print it)

File: anchors.stl

Material: PLA

Layer height: 0.20 mm

Supports: No

Rafts: Yes (I used 2 layers)

NOTE: small parts remove with caution.

______________________________________

File: crows_nest.stl

Material: PLA

Layer height: 0.20 mm

Supports: Yes

Rafts: YES (I used 2 layers)

______________________________________

File: front_blade_fin.stl

Material: PLA

Layer height: 0.20 mm

Supports: No

Rafts: No

NOTE: you will need to print 2 of each of the blades

______________________________________

File: main_cannon.stl

Material: PLA

Layer height: 0.20 mm

Supports: No

Rafts: Yes (I used 2 layers)

NOTE: you will need to print 4 of these,

I recommend on printing one at a time they seem to print better that way.

______________________________________

File: main_hull_L.stl

Material: PLA

Layer height: 0.20 mm

Supports: YES (its minor for the pin holes)

Rafts: No

NOTE: prints easy, has pin holes on bottom to align

with the other half.

______________________________________

File: main_hull_R.stl

Material: PLA

Layer height: 0.20 mm

Supports: YES (its minor for the pin holes)

Rafts: No

NOTE: prints easy, has pin holes on bottom to align

with the other half.

______________________________________

File: MSC_barrel.stl

Material: PLA

Layer height: 0.20 mm

Supports: No

Rafts: No

NOTE: the barrel is separate so it can be printed in different colors if wanted
simple glue it to the nose_msc.stl it has a pin and a hole on the barrel.

______________________________________

File: nose.stl

Material: PLA

Layer height: 0.20 mm

Supports: No

Rafts: No

NOTE: none

______________________________________

File: nose_MSC.stl

Material: PLA

Layer height: 0.20 mm

Supports: No

Rafts: No

NOTE: none

______________________________________

File: pins.stl

Material: PLA

Layer height: 0.20 mm

Supports: No

Rafts: Yes (I used 2 layers)

NOTE: pins for the main hull and the turrets. you can use 1/8 metal pins as well.

______________________________________

File: propeller_pins.stl

Material: PLA

Layer height: 0.20 mm

Supports: Yes

Rafts: Yes (I used 2 layers)

NOTE: pins for the propellers, the larger end attaches it the the main hull.

______________________________________

File: propellers.stl

Material: PLA

Layer height: 0.20 mm

Supports: Yes

Rafts: Yes (I used 2 layers)

NOTE: none

______________________________________

File: wings.stl

Material: PLA

Layer height: 0.20 mm

Supports: Yes

Rafts: No

NOTE: none

______________________________________

File: stand.stl

Material: PLA

Layer height: 0.20 mm

Supports: No

Rafts: No

NOTE: none