Tiers
3 of 20 pioneers
USD 50.00
Matilda I - A11 Infantry Tank Mark I (UK, WW2)
Matilda I - A11 Infantry Tank Mark I (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Crusader A15 Mk.III (UK, WW2)
Crusader A15 Mk.III (UK, WW2)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Crusader gun tractor (UK, WW2, D-day)
Crusader gun tractor (UK, WW2, D-day)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Pre-hollowed option
Option to print tracks separately or attached to hull
Crusader AA mark III (UK, WW2, D-day)
Crusader AA mark III (UK, WW2, D-day)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Sherman Duplex Drive (Donald Duck) (UK, WW2, D-Day)
Sherman Duplex Drive (Donald Duck) (UK, WW2, D-Day)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
17 Pdr SP Achilles (UK, WW2, D-Day)
17 Pdr SP Achilles (UK, WW2, D-Day)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Valentine Tank Mk-IV (UK, WW2)
Valentine Tank Mk-IV (UK, WW2)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Lanchester 6x4 Armoured car (UK, WW2)
Lanchester 6x4 Armoured car (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Kangaroo APC (“Defrocked Priest”) (UK, WW2)
Kangaroo APC (“Defrocked Priest”) (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Churchill MK III (UK, WW2)
Churchill MK III (UK, WW2)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Cruiser tank A9 Mk.I (UK, WW2)
Cruiser tank A9 Mk.I (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Vickers Mk.E type A (“Six-tonner”) (UK, WW2)
Vickers Mk.E type A (“Six-tonner”) (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
AEC Mk.III Armoured Car (UK, WW2)
AEC Mk.III Armoured Car (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Tetrarch, Light Tank Mk.VII (A17) (UK, WW2, Lend-Lease)
Tetrarch, Light Tank Mk.VII (A17) (UK, WW2, Lend-Lease).
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Sherman BARV M4A2 (Amphibious, UK, WW2)
Sherman BARV M4A2 (Amphibious, UK, WW2)
Beach Armored Recovery Vehicle
Our PATREON: www.patreon.com/Wargame3d
Our MyMiniFactory: https://www.myminifactory.com/users/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe and on our Website.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Special thanks to P.H. Jones for his photos and reviews of our 3d miniatures.
This EARLY BIRD reward will make the following 15 BRITISH Fighting vehicles of WW2 (Vol.1) (scale 1:56) available for your PERSONAL use: 1. Matilda I - A11 Infantry Tank MK.I 2. M4A2 Sherman III Duplex Drive “Donald Duck” tank 3. Crusader AA Mk III 4. 17 Pdr SP Achilles 5. Crusader II Gun Tractor 6. Crusader A15 Mk.III 7. Valentine tank IV 8. Lanchester 6x4 armoured car 9. Kangaroo APC (“Defrocked Priest”) 10. Churchill МК III (A22) (UK) 11. Tank Cruiser A9 12. Vickers Mk.E type A (“Six-tonner”) 13. Tetrarch, Light Tank Mk.VII (A17) 14. AEC Mk.III Armoured Car 15. Sherman BARV (Beach Armored Recovery Vehicle) + milestones with 3 extra models + pre-supported and unsupported STL files in scale 28mm (1/56) + successfull resize to other scales + good for FDM and RESIN printing + turret magnetizing + hatch open + hollowed options This reward grants the right to print for PERSONAL use only. Backers do not have the right to sell/give away the files or printed copies.
3 pioneers
USD 56.00
Matilda I - A11 Infantry Tank Mark I (UK, WW2)
Matilda I - A11 Infantry Tank Mark I (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Sherman Duplex Drive (Donald Duck) (UK, WW2, D-Day)
Sherman Duplex Drive (Donald Duck) (UK, WW2, D-Day)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Crusader AA mark III (UK, WW2, D-day)
Crusader AA mark III (UK, WW2, D-day)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
17 Pdr SP Achilles (UK, WW2, D-Day)
17 Pdr SP Achilles (UK, WW2, D-Day)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Crusader gun tractor (UK, WW2, D-day)
Crusader gun tractor (UK, WW2, D-day)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Pre-hollowed option
Option to print tracks separately or attached to hull
Crusader A15 Mk.III (UK, WW2)
Crusader A15 Mk.III (UK, WW2)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Valentine Tank Mk-IV (UK, WW2)
Valentine Tank Mk-IV (UK, WW2)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Lanchester 6x4 Armoured car (UK, WW2)
Lanchester 6x4 Armoured car (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Kangaroo APC (“Defrocked Priest”) (UK, WW2)
Kangaroo APC (“Defrocked Priest”) (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Churchill MK III (UK, WW2)
Churchill MK III (UK, WW2)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Cruiser tank A9 Mk.I (UK, WW2)
Cruiser tank A9 Mk.I (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Vickers Mk.E type A (“Six-tonner”) (UK, WW2)
Vickers Mk.E type A (“Six-tonner”) (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Tetrarch, Light Tank Mk.VII (A17) (UK, WW2, Lend-Lease)
Tetrarch, Light Tank Mk.VII (A17) (UK, WW2, Lend-Lease).
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
AEC Mk.III Armoured Car (UK, WW2)
AEC Mk.III Armoured Car (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Sherman BARV M4A2 (Amphibious, UK, WW2)
Sherman BARV M4A2 (Amphibious, UK, WW2)
Beach Armored Recovery Vehicle
Our PATREON: www.patreon.com/Wargame3d
Our MyMiniFactory: https://www.myminifactory.com/users/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe and on our Website.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Special thanks to P.H. Jones for his photos and reviews of our 3d miniatures.
This reward will make the following 15 BRITISH Fighting vehicles of WW2 (Vol.1) (scale 1:56) available for your PERSONAL use: 1. Matilda I - A11 Infantry Tank MK.I 2. M4A2 Sherman III Duplex Drive “Donald Duck” tank 3. Crusader AA Mk III 4. 17 Pdr SP Achilles 5. Crusader II Gun Tractor 6. Crusader A15 Mk.III 7. Valentine tank IV 8. Lanchester 6x4 armoured car 9. Kangaroo APC (“Defrocked Priest”) 10. Churchill МК III (A22) (UK) 11. Tank Cruiser A9 12. Vickers Mk.E type A (“Six-tonner”) 13. Tetrarch, Light Tank Mk.VII (A17) 14. AEC Mk.III Armoured Car 15. Sherman BARV (Beach Armored Recovery Vehicle) + milestones with 3 extra models + pre-supported and unsupported STL files in scale 28mm (1/56) + successfull resize to other scales + good for FDM and RESIN printing + turret magnetizing + hatch open + hollowed options This reward grants the right to print for PERSONAL use only. Backers do not have the right to sell/give away the files or printed copies.
1 pioneer
USD 199.00
Sherman Duplex Drive (Donald Duck) (UK, WW2, D-Day)
Sherman Duplex Drive (Donald Duck) (UK, WW2, D-Day)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Matilda I - A11 Infantry Tank Mark I (UK, WW2)
Matilda I - A11 Infantry Tank Mark I (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
17 Pdr SP Achilles (UK, WW2, D-Day)
17 Pdr SP Achilles (UK, WW2, D-Day)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Crusader A15 Mk.III (UK, WW2)
Crusader A15 Mk.III (UK, WW2)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Crusader gun tractor (UK, WW2, D-day)
Crusader gun tractor (UK, WW2, D-day)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Pre-hollowed option
Option to print tracks separately or attached to hull
Crusader AA mark III (UK, WW2, D-day)
Crusader AA mark III (UK, WW2, D-day)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Valentine Tank Mk-IV (UK, WW2)
Valentine Tank Mk-IV (UK, WW2)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Lanchester 6x4 Armoured car (UK, WW2)
Lanchester 6x4 Armoured car (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Kangaroo APC (“Defrocked Priest”) (UK, WW2)
Kangaroo APC (“Defrocked Priest”) (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Churchill MK III (UK, WW2)
Churchill MK III (UK, WW2)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Cruiser tank A9 Mk.I (UK, WW2)
Cruiser tank A9 Mk.I (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Vickers Mk.E type A (“Six-tonner”) (UK, WW2)
Vickers Mk.E type A (“Six-tonner”) (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Tetrarch, Light Tank Mk.VII (A17) (UK, WW2, Lend-Lease)
Tetrarch, Light Tank Mk.VII (A17) (UK, WW2, Lend-Lease).
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
AEC Mk.III Armoured Car (UK, WW2)
AEC Mk.III Armoured Car (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Sherman BARV M4A2 (Amphibious, UK, WW2)
Sherman BARV M4A2 (Amphibious, UK, WW2)
Beach Armored Recovery Vehicle
Our PATREON: www.patreon.com/Wargame3d
Our MyMiniFactory: https://www.myminifactory.com/users/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe and on our Website.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Special thanks to P.H. Jones for his photos and reviews of our 3d miniatures.
STL PACK - 16 AMPHIBIOUS Fighting vehicles of WW2 (1:56, 28mm) - PERSONAL USE
USD 60.00
PACK - 16 AMPHIBIOUS Fighting vehicles of WW2 (1:56, 28mm) - PERSONAL USE :
1. LVT-1 Alligator (USA)
2. LVT(A)-1 Amtrack (USA)
3. LVT-2 Water Buffalo (USA)
4. LVT-3 Bushmaster (USA)
5. LVT-4 Water Buffalo (USA)
6. IJN Type 2 (Ka-Mi) (Japan)
7. T-37A amphibious light tank (USSR)
8. T-38 amphibious light tank (USSR)
9. Landwasserschlepper (LWS) (Germany)
10. VW Type 166 (VW Schwimmwagen) (Germany)
11. Terrapin - 4-ton amphibian (UK)
12. Ford GPA "Seep" (USA)
13. M29 Weasel Amphibious Vehicle (USA)
14. Sherman BARV (UK)
15. LVT-2(A) Buffalo II (USA)
16. LVTP-5 - Amphibious APC (USA, 1956, post-war)
Our PATREON: www.patreon.com/Wargame3d
Our Website: www.wargame3d.net
Our MMF Tribe: www.myminifactory.com/users/Wargame3d?show=tribe
Commercial license is available at our Website: https://www.wargame3d.net/product-page/amphibious-fighting-vehicles-of-ww2-commercial-license
The base model is 28mm scale (1:56). Successful resize to other sizes.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks/wheels separately or attached to hull
Special thanks to P.H. Jones for his photos and reviews of our 3d miniatures.
STL PACK - 18 Fighting vehicles of WW1 (1:56, 28mm) - PERSONAL USE
USD 68.00
PACK - 18 Fighting vehicles of WW1 (1:56, 28mm) - PERSONAL USE :
1.Char Saint Chamond (France)
2.Schneider CD Artillery Tractor (France)
3.TANK MARK I (British)
4.Mark VIII Liberty (USA+ British)
5.Austin Armoured car (British)
6.Gun Carrier Mark I (British)
7.Lanchester 4x2 Armoured car (British)
8.Pierce-Arrow Armoured car (British)
9.Anti tank gun - 3.7 cm TAK 1918 (Germany)
10.Ehrhardt EV4 Armoured car (Germany)
11.Garford-Putilov Armoured car (Soviet)
12.Fiat-Izhorski Armoured car (Soviet)
13.Peugeot Armoured Car 1914 (France)
14.Minerva Armoured car(Austro-Hungary)
15.Heavy gun BL 60-pounder (UK)
16.Schneider CA-1 (France)
17.Leichter Kampfwagen II (LK II) (Germany)
18.Medium Mark B “Whippet” (British Empire)
Our PATREON: www.patreon.com/Wargame3d
Our Website: www.wargame3d.net
Our MMF Tribe: www.myminifactory.com/users/Wargame3d?show=tribe
Commercial license is available at our Website: https://www.wargame3d.net/product-page/fighting-vehicles-of-ww1-volume-1-commercial-license-1
The base model is 28mm scale (1:56). Successful resize to other sizes.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks/wheels separately or attached to hull
Special thanks to P.H. Jones for his photos and reviews of our 3d miniatures.
STL PACK - 16 Fighting vehicles of Spanish Civil War (1936-1939) (1:56, 28mm) - PERSONAL USE
USD 60.00
PACK - 16 Fighting vehicles of Spanish Civil War (1936-1939) (1:56, 28mm) - PERSONAL USE
1) Modelo Trubia Serie A
2) Trubia NAVAL
3) Tractor Landesa
4) Lancia Ansaldo 1ZM
5) BT-5
6) Panzer Breda (2 different turrets)
7) Hispano-Suiza MC-36 (2 different turrets)
8) Befehlswagen I command vehicle
9) Blindado tipo ZIS (UNL-35)
10) ААС-1937 (2 different turrets)
11) Fiat CV33/35 ‘Breda
12) Constructora Field – FAI
13) Bilbao Modelo 1932
14) Renault FT-17 TSF
15) Schneider CA-1
16) Blindado FERROL
Our PATREON: www.patreon.com/Wargame3d
Our Website: www.wargame3d.net
Our MMF Tribe: www.myminifactory.com/users/Wargame3d?show=tribe
Commercial license is available at our Website: https://www.wargame3d.net/product-page/fighting-vehicles-of-spanish-civil-war-1936-39-years-commercial-license
The base model is 28mm scale (1:56). Successful resize to other sizes.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks/wheels separately or attached to hull
Special thanks to P.H. Jones for his photos and reviews of our 3d miniatures.
This reward includes 4 STL PACKS of 3D Fighting vehicles (scale 1:56) available for your PERSONAL use: 15 BRITISH Fighting vehicles of WW2 (Vol.1) + milestones (current Frontier) 18 Fighting vehicles of WW1 16 Fighting vehicles of Spanish Civil War 16 Amphibious Fighting vehicles of WW2 + pre-supported and unsupported STL files in scale 28mm (1/56) + successfull resize to other scales + good for FDM and RESIN printing + turret magnetizing + hatch open + hollowed options This reward grants the right to print for PERSONAL use only. Backers do not have the right to sell/give away the files or printed copies.
0 pioneers
USD 165.00
Matilda I - A11 Infantry Tank Mark I (UK, WW2)
Matilda I - A11 Infantry Tank Mark I (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Sherman Duplex Drive (Donald Duck) (UK, WW2, D-Day)
Sherman Duplex Drive (Donald Duck) (UK, WW2, D-Day)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Crusader gun tractor (UK, WW2, D-day)
Crusader gun tractor (UK, WW2, D-day)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Pre-hollowed option
Option to print tracks separately or attached to hull
Crusader AA mark III (UK, WW2, D-day)
Crusader AA mark III (UK, WW2, D-day)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Crusader A15 Mk.III (UK, WW2)
Crusader A15 Mk.III (UK, WW2)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
17 Pdr SP Achilles (UK, WW2, D-Day)
17 Pdr SP Achilles (UK, WW2, D-Day)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Valentine Tank Mk-IV (UK, WW2)
Valentine Tank Mk-IV (UK, WW2)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Lanchester 6x4 Armoured car (UK, WW2)
Lanchester 6x4 Armoured car (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Kangaroo APC (“Defrocked Priest”) (UK, WW2)
Kangaroo APC (“Defrocked Priest”) (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Churchill MK III (UK, WW2)
Churchill MK III (UK, WW2)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Cruiser tank A9 Mk.I (UK, WW2)
Cruiser tank A9 Mk.I (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Vickers Mk.E type A (“Six-tonner”) (UK, WW2)
Vickers Mk.E type A (“Six-tonner”) (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Tetrarch, Light Tank Mk.VII (A17) (UK, WW2, Lend-Lease)
Tetrarch, Light Tank Mk.VII (A17) (UK, WW2, Lend-Lease).
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
AEC Mk.III Armoured Car (UK, WW2)
AEC Mk.III Armoured Car (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Sherman BARV M4A2 (Amphibious, UK, WW2)
Sherman BARV M4A2 (Amphibious, UK, WW2)
Beach Armored Recovery Vehicle
Our PATREON: www.patreon.com/Wargame3d
Our MyMiniFactory: https://www.myminifactory.com/users/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe and on our Website.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Special thanks to P.H. Jones for his photos and reviews of our 3d miniatures.
This reward will make the following 15 BRITISH Fighting vehicles of WW2 (Vol.1) (scale 1:56) available for your COMMERCIAL use: 1. Matilda I - A11 Infantry Tank MK.I 2. M4A2 Sherman III Duplex Drive “Donald Duck” tank 3. Crusader AA Mk III 4. 17 Pdr SP Achilles 5. Crusader II Gun Tractor 6. Crusader A15 Mk.III 7. Valentine tank IV 8. Lanchester 6x4 armoured car 9. Kangaroo APC (“Defrocked Priest”) 10. Churchill МК III (A22) (UK) 11. Tank Cruiser A9 12. Vickers Mk.E type A (“Six-tonner”) 13. Tetrarch, Light Tank Mk.VII (A17) 14. AEC Mk.III Armoured Car 15. Sherman BARV (Beach Armored Recovery Vehicle) + milestones with 3 extra models + pre-supported and unsupported STL files in scale 28mm (1/56) + successfull resize to other scales + good for FDM and RESIN printing + turret magnetizing + hatch open + hollowed options Lifetime COMMERCIAL license to print and sell physical versions of all STL files from this offer.
0 pioneers
USD 549.00
Sherman Duplex Drive (Donald Duck) (UK, WW2, D-Day)
Sherman Duplex Drive (Donald Duck) (UK, WW2, D-Day)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Matilda I - A11 Infantry Tank Mark I (UK, WW2)
Matilda I - A11 Infantry Tank Mark I (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
17 Pdr SP Achilles (UK, WW2, D-Day)
17 Pdr SP Achilles (UK, WW2, D-Day)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Crusader A15 Mk.III (UK, WW2)
Crusader A15 Mk.III (UK, WW2)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Crusader gun tractor (UK, WW2, D-day)
Crusader gun tractor (UK, WW2, D-day)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Pre-hollowed option
Option to print tracks separately or attached to hull
Crusader AA mark III (UK, WW2, D-day)
Crusader AA mark III (UK, WW2, D-day)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Lanchester 6x4 Armoured car (UK, WW2)
Lanchester 6x4 Armoured car (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Valentine Tank Mk-IV (UK, WW2)
Valentine Tank Mk-IV (UK, WW2)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Kangaroo APC (“Defrocked Priest”) (UK, WW2)
Kangaroo APC (“Defrocked Priest”) (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Churchill MK III (UK, WW2)
Churchill MK III (UK, WW2)
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Vickers Mk.E type A (“Six-tonner”) (UK, WW2)
Vickers Mk.E type A (“Six-tonner”) (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Cruiser tank A9 Mk.I (UK, WW2)
Cruiser tank A9 Mk.I (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
AEC Mk.III Armoured Car (UK, WW2)
AEC Mk.III Armoured Car (UK, WW2)
Our PATREON: www.patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Tetrarch, Light Tank Mk.VII (A17) (UK, WW2, Lend-Lease)
Tetrarch, Light Tank Mk.VII (A17) (UK, WW2, Lend-Lease).
Our PATREON: http://patreon.com/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Sherman BARV M4A2 (Amphibious, UK, WW2)
Sherman BARV M4A2 (Amphibious, UK, WW2)
Beach Armored Recovery Vehicle
Our PATREON: www.patreon.com/Wargame3d
Our MyMiniFactory: https://www.myminifactory.com/users/Wargame3d
Our website: www.wargame3d.net
Commercial use is available at our MyMiniFactory Tribe and on our Website.
The base model is 28mm scale (1:56). Successful rescale to 1:72 and 1:100.
Features include:
Pre-supported option
Pre-hollowed option
Open hatches option
Option to print tracks separately or attached to hull
Special thanks to P.H. Jones for his photos and reviews of our 3d miniatures.
STL PACK - 16 AMPHIBIOUS Fighting vehicles of WW2 (1:56, 28mm) - PERSONAL USE
USD 60.00
PACK - 16 AMPHIBIOUS Fighting vehicles of WW2 (1:56, 28mm) - PERSONAL USE :
1. LVT-1 Alligator (USA)
2. LVT(A)-1 Amtrack (USA)
3. LVT-2 Water Buffalo (USA)
4. LVT-3 Bushmaster (USA)
5. LVT-4 Water Buffalo (USA)
6. IJN Type 2 (Ka-Mi) (Japan)
7. T-37A amphibious light tank (USSR)
8. T-38 amphibious light tank (USSR)
9. Landwasserschlepper (LWS) (Germany)
10. VW Type 166 (VW Schwimmwagen) (Germany)
11. Terrapin - 4-ton amphibian (UK)
12. Ford GPA "Seep" (USA)
13. M29 Weasel Amphibious Vehicle (USA)
14. Sherman BARV (UK)
15. LVT-2(A) Buffalo II (USA)
16. LVTP-5 - Amphibious APC (USA, 1956, post-war)
Our PATREON: www.patreon.com/Wargame3d
Our Website: www.wargame3d.net
Our MMF Tribe: www.myminifactory.com/users/Wargame3d?show=tribe
Commercial license is available at our Website: https://www.wargame3d.net/product-page/amphibious-fighting-vehicles-of-ww2-commercial-license
The base model is 28mm scale (1:56). Successful resize to other sizes.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks/wheels separately or attached to hull
Special thanks to P.H. Jones for his photos and reviews of our 3d miniatures.
STL PACK - 18 Fighting vehicles of WW1 (1:56, 28mm) - PERSONAL USE
USD 68.00
PACK - 18 Fighting vehicles of WW1 (1:56, 28mm) - PERSONAL USE :
1.Char Saint Chamond (France)
2.Schneider CD Artillery Tractor (France)
3.TANK MARK I (British)
4.Mark VIII Liberty (USA+ British)
5.Austin Armoured car (British)
6.Gun Carrier Mark I (British)
7.Lanchester 4x2 Armoured car (British)
8.Pierce-Arrow Armoured car (British)
9.Anti tank gun - 3.7 cm TAK 1918 (Germany)
10.Ehrhardt EV4 Armoured car (Germany)
11.Garford-Putilov Armoured car (Soviet)
12.Fiat-Izhorski Armoured car (Soviet)
13.Peugeot Armoured Car 1914 (France)
14.Minerva Armoured car(Austro-Hungary)
15.Heavy gun BL 60-pounder (UK)
16.Schneider CA-1 (France)
17.Leichter Kampfwagen II (LK II) (Germany)
18.Medium Mark B “Whippet” (British Empire)
Our PATREON: www.patreon.com/Wargame3d
Our Website: www.wargame3d.net
Our MMF Tribe: www.myminifactory.com/users/Wargame3d?show=tribe
Commercial license is available at our Website: https://www.wargame3d.net/product-page/fighting-vehicles-of-ww1-volume-1-commercial-license-1
The base model is 28mm scale (1:56). Successful resize to other sizes.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks/wheels separately or attached to hull
Special thanks to P.H. Jones for his photos and reviews of our 3d miniatures.
STL PACK - 16 Fighting vehicles of Spanish Civil War (1936-1939) (1:56, 28mm) - PERSONAL USE
USD 60.00
PACK - 16 Fighting vehicles of Spanish Civil War (1936-1939) (1:56, 28mm) - PERSONAL USE
1) Modelo Trubia Serie A
2) Trubia NAVAL
3) Tractor Landesa
4) Lancia Ansaldo 1ZM
5) BT-5
6) Panzer Breda (2 different turrets)
7) Hispano-Suiza MC-36 (2 different turrets)
8) Befehlswagen I command vehicle
9) Blindado tipo ZIS (UNL-35)
10) ААС-1937 (2 different turrets)
11) Fiat CV33/35 ‘Breda
12) Constructora Field – FAI
13) Bilbao Modelo 1932
14) Renault FT-17 TSF
15) Schneider CA-1
16) Blindado FERROL
Our PATREON: www.patreon.com/Wargame3d
Our Website: www.wargame3d.net
Our MMF Tribe: www.myminifactory.com/users/Wargame3d?show=tribe
Commercial license is available at our Website: https://www.wargame3d.net/product-page/fighting-vehicles-of-spanish-civil-war-1936-39-years-commercial-license
The base model is 28mm scale (1:56). Successful resize to other sizes.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks/wheels separately or attached to hull
Special thanks to P.H. Jones for his photos and reviews of our 3d miniatures.
This reward includes 4 STL PACKS of 3D Fighting vehicles (scale 1:56) available for your COMMERCIAL USE: 15 BRITISH Fighting vehicles of WW2 (Vol.1) + milestones (current Frontier) 18 Fighting vehicles of WW1 16 Fighting vehicles of Spanish Civil War 16 Amphibious Fighting vehicles of WW2 + pre-supported and unsupported STL files in scale 28mm (1/56) + successfull resize to other scales + good for FDM and RESIN printing + turret magnetizing + hatch open + hollowed options Lifetime COMMERCIAL license to print and sell physical versions of all STL files from this offer.
Add-ons
USD 68.00
STL PACK - 18 ITALIAN Fighting vehicles of WW2 (Volume 2, 1:56, 28mm) - PERSONAL USE:
1. SPG Semovente L40 da 47/32
2. SPG Semovente M42M da 75/34
3. SPG Semovente M43 da 105/25
4. Carro Armato M11/39
5. Carro Armato M14/41
6. Carro Armato M15/42
7. Light tank FIAT 3000
8. Camionetta SPA-Viberti AS42 - Sahariana
9. Camionetta Desertica AS43
10. Cannone 75/39 medium anti-tank gun (combat and transport positions)
11. Lancia 3Ro Heavy truck (Ro-Ro)
12. Autocannone da 90/53 su Lancia 3Ro (combat and transport positions)
13. Carro Armato Leggero L6/40
14. FIAT 665NM Protetto
15. Autocannone da 20/65 su FIAT-SPA 38R
16. Lancia 1ZM armoured car
17. L6/40 Lanciafiamme
18. 65mm L/17 Mountain Gun
Our PATREON: www.patreon.com/Wargame3d
Our Website: www.wargame3d.net
Our MMF Tribe: www.myminifactory.com/users/Wargame3d?show=tribe
Full list of Wargame3D models: https://teletype.in/@wargame3d/full_list_of_3Dmodels
Commercial license is available at our Website: https://www.wargame3d.net/product-page/italian-fighting-vehicles-of-ww2-commercial-license
The base models are in 28mm scale (1:56). Successful resize to other sizes.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks/wheels separately or attached to hull
Special thanks to P.H. Jones for his photos and reviews of our 3d miniatures.
USD 60.00
STL PACK - 15 Fighting vehicles of KOREAN WAR (1950-1953) (1:56, 28mm) - PERSONAL USE:
1. M4A2 "Sherman" 75mm Medium Tank
2. M7 Priest Self-Propelled Gun
3. Centurion Tank Mk.3
4. Medium Tank M26 Pershing
5. Light Tank M41 Walker Bulldog
6. Light Tank M24 Chaffee
7. М37 105mm HMC
8. M19 MGMC
9. M41 155mm GMC
10. М40 155mm HMC
11. A.22F, Churchill Crocodile with trailer
12. M18 GMC - Hellcat
13. M39 Armored Utility Vehicle
14. M29 Weasel Tracked Vehicle
15. M18 90mm GMC - Super Hellcat
16. Medium Tank M46 Patton
Our PATREON: patreon.com/Wargame3d
Our Website: wargame3d.net
Our MMF Tribe: myminifactory.com/users/Wargame3d?show=tribe
Commercial license is available at our Website: https://www.wargame3d.net/product-page/fighting-vehicles-of-the-korean-war-1950-1953-commercial-license
The base model is 28mm scale (1:56). Successful resize to other sizes.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks/wheels separately or attached to hull
Special thanks to P.H. Jones for his photos and reviews of our 3d miniatures.
USD 60.00
PACK - 16 Fighting vehicles of Spanish Civil War (1936-1939) (1:56, 28mm) - PERSONAL USE
1) Modelo Trubia Serie A
2) Trubia NAVAL
3) Tractor Landesa
4) Lancia Ansaldo 1ZM
5) BT-5
6) Panzer Breda (2 different turrets)
7) Hispano-Suiza MC-36 (2 different turrets)
8) Befehlswagen I command vehicle
9) Blindado tipo ZIS (UNL-35)
10) ААС-1937 (2 different turrets)
11) Fiat CV33/35 ‘Breda
12) Constructora Field – FAI
13) Bilbao Modelo 1932
14) Renault FT-17 TSF
15) Schneider CA-1
16) Blindado FERROL
Our PATREON: www.patreon.com/Wargame3d
Our Website: www.wargame3d.net
Our MMF Tribe: www.myminifactory.com/users/Wargame3d?show=tribe
Commercial license is available at our Website: https://www.wargame3d.net/product-page/fighting-vehicles-of-spanish-civil-war-1936-39-years-commercial-license
The base model is 28mm scale (1:56). Successful resize to other sizes.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks/wheels separately or attached to hull
Special thanks to P.H. Jones for his photos and reviews of our 3d miniatures.
USD 68.00
PACK - 18 Fighting vehicles of WW1 (1:56, 28mm) - PERSONAL USE :
1.Char Saint Chamond (France)
2.Schneider CD Artillery Tractor (France)
3.TANK MARK I (British)
4.Mark VIII Liberty (USA+ British)
5.Austin Armoured car (British)
6.Gun Carrier Mark I (British)
7.Lanchester 4x2 Armoured car (British)
8.Pierce-Arrow Armoured car (British)
9.Anti tank gun - 3.7 cm TAK 1918 (Germany)
10.Ehrhardt EV4 Armoured car (Germany)
11.Garford-Putilov Armoured car (Soviet)
12.Fiat-Izhorski Armoured car (Soviet)
13.Peugeot Armoured Car 1914 (France)
14.Minerva Armoured car(Austro-Hungary)
15.Heavy gun BL 60-pounder (UK)
16.Schneider CA-1 (France)
17.Leichter Kampfwagen II (LK II) (Germany)
18.Medium Mark B “Whippet” (British Empire)
Our PATREON: www.patreon.com/Wargame3d
Our Website: www.wargame3d.net
Our MMF Tribe: www.myminifactory.com/users/Wargame3d?show=tribe
Commercial license is available at our Website: https://www.wargame3d.net/product-page/fighting-vehicles-of-ww1-volume-1-commercial-license-1
The base model is 28mm scale (1:56). Successful resize to other sizes.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks/wheels separately or attached to hull
Special thanks to P.H. Jones for his photos and reviews of our 3d miniatures.
USD 60.00
PACK - 16 AMPHIBIOUS Fighting vehicles of WW2 (1:56, 28mm) - PERSONAL USE :
1. LVT-1 Alligator (USA)
2. LVT(A)-1 Amtrack (USA)
3. LVT-2 Water Buffalo (USA)
4. LVT-3 Bushmaster (USA)
5. LVT-4 Water Buffalo (USA)
6. IJN Type 2 (Ka-Mi) (Japan)
7. T-37A amphibious light tank (USSR)
8. T-38 amphibious light tank (USSR)
9. Landwasserschlepper (LWS) (Germany)
10. VW Type 166 (VW Schwimmwagen) (Germany)
11. Terrapin - 4-ton amphibian (UK)
12. Ford GPA "Seep" (USA)
13. M29 Weasel Amphibious Vehicle (USA)
14. Sherman BARV (UK)
15. LVT-2(A) Buffalo II (USA)
16. LVTP-5 - Amphibious APC (USA, 1956, post-war)
Our PATREON: www.patreon.com/Wargame3d
Our Website: www.wargame3d.net
Our MMF Tribe: www.myminifactory.com/users/Wargame3d?show=tribe
Commercial license is available at our Website: https://www.wargame3d.net/product-page/amphibious-fighting-vehicles-of-ww2-commercial-license
The base model is 28mm scale (1:56). Successful resize to other sizes.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks/wheels separately or attached to hull
Special thanks to P.H. Jones for his photos and reviews of our 3d miniatures.
USD 52.00
STL PACK - 15 Fighting vehicles of LEND-LEASE - WW2 (1:56, 28mm) - PERSONAL USE:
1) Matilda II Mk.IV with ZiS-5 76mm
2) M3 Grant Medium Tank
3) M31 ARV (Armored Recovery Vehicle)
4) Tetrarch, Light Tank Mk.VII (A17)
5) M3A1E1 scout car
6) T48 Motor Gun Carriage (Su-57)
7) M17 MGMC
8) M10 GMC Tank (Wolverine)
9) Valentine tank IV
10) Valentine tank V
11) Valentine Bridgelayer
12) US Carrier T16 (Universal Carrier)
13) Churchill МК III
14) Light tank Stuart M3L
Our PATREON: patreon.com/Wargame3d
Our Website: wargame3d.net
Our MMF Tribe: myminifactory.com/users/Wargame3d?show=tribe
Commercial license is available at our Website: https://www.wargame3d.net/product-page/fighting-vehicles-of-lend-lease-ww2-commercial-license
The base model is 28mm scale (1:56). Successful resize to other sizes.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks/wheels separately or attached to hull
Special thanks to P.H. Jones for his photos and reviews of our 3d miniatures.
USD 56.00
STL PACK - 15 Fighting vehicles of D-Day - WW2 (1:56, 28mm) - PERSONAL USE:
1. M7 Sexton
2. M4A2 Sherman “Donald Duck” tank
3. Canadian Wasp Mk IIC
4. Otter Mk I
5. Crusader AA Mk III
6. M8 Greyhound
7. Staghound T17E1
8. 17 Pdr SP Achilles
9. LCVP Higgins Boat
10. M3 Lee Medium Tank
11. Crusader II Gun Tractor
12. M4 high speed tractor
13. Dodge WC 51
14. Sherman Rhinoceros tank
15. M12 Gun Motor Carriage
Our PATREON: patreon.com/Wargame3d
Our Website: wargame3d.net
Our MMF Tribe: myminifactory.com/users/Wargame3d?show=tribe
Commercial license is available at our Website: https://www.wargame3d.net/product-page/fighting-vehicles-of-d-day-normandy-ww2-commercial-license
The base model is 28mm scale (1:56). Successful resize to other sizes.
Features include:
Pre-supported option
Holes for magnets in turrets
Pre-hollowed option
Open hatches option
Option to print tracks/wheels separately or attached to hull
Special thanks to P.H. Jones for his photos and reviews of our 3d miniatures.
Please update your notification settings if you want to get notified when there is a new comment.