Dwarven mine
Created by
-
$ 332
raised
-
8
pioneers
Campaign ended: Wed, February 28, 2024 at 02:00 PM GMT
- Pledges (5)
- Add-ons (25)
-
$332.10
raised
-
8
pioneers
Tiers
0 of 100 pioneers
USD 29.90
CoreSet dwarven mine
the core set of the dwarven mine campaign
You will receive all of the STL files for the core set ( 30 dwarfs + 12 bases + 21 assets ) We recomand you to use resin printer. All models are already tested and printed by us. We place supports for overhangs and for suction force consideration. The pre-supported models are not hollowed. All our supported parts of the models can be printed with a printer like an elegoo saturn size and most of them an elegoo mars size. If you have smaller or bigger printer feel free to use the unsupported files and print them smaller or bigger :D !!!
0 pioneers
USD 39.90
CoreSet dwarven mine
the core set of the dwarven mine campaign
You will receive all of the STL files for the core set ( 30 dwarfs + 12 bases + 21 assets ) We recomand you to use resin printer. All models are already tested and printed by us. We place supports for overhangs and for suction force consideration. The pre-supported models are not hollowed. All our supported parts of the models can be printed with a printer like an elegoo saturn size and most of them an elegoo mars size. If you have smaller or bigger printer feel free to use the unsupported files and print them smaller or bigger :D !!!
8 of 100 pioneers
USD 39.90
CoreSet dwarven mine
the core set of the dwarven mine campaign
You will receive all of the STL files for the core set ( 30 dwarfs + 12 bases + 21 assets ) + All the Milestone stretch goals unlocked during the campaign We recomand you to use resin printer. All models are already tested and printed by us. We place supports for overhangs and for suction force consideration. The pre-supported models are not hollowed. All our supported parts of the models can be printed with a printer like the elegoo saturnsiz and most of them like an elegoo mars size. If you have smaller or bigger printer feel free to use the unsupported files and print them smaller or bigger :D !!!
8 pioneers
USD 49.90
CoreSet dwarven mine
the core set of the dwarven mine campaign
You will receive all of the STL files for the core set ( 30 dwarfs + 12 bases + 21 assets ) + All the Milestone stretch goals unlocked during the campaign We recomand you to use resin printer. All models are already tested and printed by us. We place supports for overhangs and for suction force consideration. The pre-supported models are not hollowed. All our supported parts of the models can be printed with a printer like the elegoo saturnsiz and most of them like an elegoo mars size. If you have smaller or bigger printer feel free to use the unsupported files and print them smaller or bigger :D !!!
0 pioneers
USD 219.90
CoreSet dwarven mine
the core set of the dwarven mine campaign
You will receive all of the STL files for the core set ( 30 dwarfs + 12 bases + 21 assets ) + All the Milestone stretch goals unlocked during the campaign We recomand you to use resin printer. All models are already tested and printed by us. We place supports for overhangs and for suction force consideration. The pre-supported models are not hollowed. All our supported parts of the models can be printed with a printer like the elegoo saturnsiz and most of them like an elegoo mars size. If you have smaller or bigger printer feel free to use the unsupported files and print them smaller or bigger :D !!!
Add-ons
USD 12.90
You will receive all of the STL files for Berengar. You will also receive a supported version for all STL files for RESIN 3D PRINTING. That means a DLP or SLA printer, not a FDM printer.
Berengar doesn't have basement , he is on his own paws !
All models are already tested and printed by us at 1:12 scale (around 130mm height). We place supports for overhangs and for suction force consideration. The pre-supported models are hollowed.
All our supported parts of the models can be printed with a printer like the elegoo saturn size, and most of them with an elegoo mars size.
If you have smaller or bigger printer feel free to use the unsupported files and print them smaller or bigger :D !!!
USD 12.90
You will receive all of the STL files for Gallosaurus spotter. You will also receive a supported version for all STL files for RESIN 3D PRINTING. That means a DLP or SLA printer, not a FDM printer.
We recomand you to use a FDM printer for the basement but it's already pre-supported for resin printer.
All models are already tested and printed by us at 1:12 scale. We place supports for overhangs and for suction force consideration. The pre-supported models are hollowed.
All our supported parts of the models can be printed with a printer like the elegoo saturn size, and most of them with an elegoo mars size.
If you have smaller or bigger printer feel free to use the unsupported files and print them smaller or bigger :D !!!
USD 12.90
You will receive all of the STL files for Gallosaurus screamer. You will also receive a supported version for all STL files for RESIN 3D PRINTING. That means a DLP or SLA printer, not a FDM printer.
We recomand you to use a FDM printer for the basement but it's already pre-supported for resin printer.
All models are already tested and printed by us at 1:12 scale (around 145mm height). We place supports for overhangs and for suction force consideration. The pre-supported models are hollowed.
All our supported parts of the models can be printed with a printer like the elegoo saturn size, and most of them with an elegoo mars size.
If you have smaller or bigger printer feel free to use the unsupported files and print them smaller or bigger :D !!!
USD 7.99
The baby elephant bust.
This is one of the 10 savanna busts we did.
This version is not pre supported.
We already tested and printed this model with a resin printer.
But you can print it with a fdm printer.
USD 9.99
The baby elephant bust.
This is one of the 10 savanna busts we did.
This version is pre supported.
this include also the chitubox file and our config, like this you can customize or remove our supports.
We already tested and printed this model with a resin printer.
But you can print it with a fdm printer with your own support.
USD 9.99
The Giraffe bust.
This is one of the 10 savanna busts we did.
This version is pre supported.
this include also the chitubox file and our config, like this you can customize or remove our supports.
We already tested and printed this model with a resin printer.
But you can print it with a fdm printer with your own support.
USD 7.99
The Giraffe bust.
This is one of the 10 savanna busts we did.
This version is not pre supported.
We already tested and printed this model with a resin printer.
But you can print it with a fdm printer.
USD 9.99
The Buffalo bust.
This is one of the 10 savanna busts we did.
This version is pre supported.
this include also the chitubox file and our config, like this you can customize or remove our supports.
We already tested and printed this model with a resin printer.
But you can print it with a fdm printer with your own support.
USD 7.99
The Buffalo bust.
This is one of the 10 savanna busts we did.
This version is not pre supported.
We already tested and printed this model with a resin printer.
But you can print it with a fdm printer.
USD 7.99
The Hyena bust.
This is one of the 10 savanna busts we did.
This version is not pre supported.
We already tested and printed this model with a resin printer.
But you can print it with a fdm printer.
USD 9.99
Feel free to check our FRONTIERS live now !!
https://www.myminifactory.com/frontier/telga-dragonbane-911
The Hyena bust.
This is one of the 10 savanna busts we did.
This version is pre supported.
this include also the chitubox file and our config, like this you can customize or remove our supports.
We already tested and printed this model with a resin printer.
But you can print it with a fdm printer with your own support.
USD 7.99
The Hippo bust.
This is one of the 10 savanna busts we did.
This version is not pre supported.
We already tested and printed this model with a resin printer.
But you can print it with a fdm printer.
USD 9.99
The Hippo bust.
This is one of the 10 savanna busts we did.
This version is pre supported.
this include also the chitubox file and our config, like this you can customize or remove our supports.
We already tested and printed this model with a resin printer.
But you can print it with a fdm printer with your own support.
USD 9.99
The Lion bust.
This is one of the 10 savanna busts we did.
This version is pre supported.
this include also the chitubox file and our config, like this you can customize or remove our supports.
We already tested and printed this model with a resin printer.
But you can print it with a fdm printer with your own support.
USD 7.99
The Lion bust.
This is one of the 10 savanna busts we did.
This version is not pre supported.
We already tested and printed this model with a resin printer.
But you can print it with a fdm printer.
USD 9.99
The Rhino bust.
This is one of the 10 savanna busts we did.
This version is pre supported.
this include also the chitubox file and our config, like this you can customize or remove our supports.
We already tested and printed this model with a resin printer.
But you can print it with a fdm printer with your own support.
USD 7.99
The Rhino bust.
This is one of the 10 savanna busts we did.
This version is not pre supported.
We already tested and printed this model with a resin printer.
But you can print it with a fdm printer.
USD 7.99
The Shoebill bust.
This is one of the 10 savanna busts we did.
This version is not pre supported.
We already tested and printed this model with a resin printer.
But you can print it with a fdm printer.
USD 9.99
The Shoebill bust.
This is one of the 10 savanna busts we did.
This version is pre supported.
this include also the chitubox file and our config, like this you can customize or remove our supports.
We already tested and printed this model with a resin printer.
But you can print it with a fdm printer with your own support.
USD 7.99
The Zebra bust.
This is one of the 10 savanna busts we did.
This version is not pre supported.
We already tested and printed this model with a resin printer.
But you can print it with a fdm printer.
USD 9.99
The Zebra bust.
This is one of the 10 savanna busts we did.
This version is pre supported.
this include also the chitubox file and our config, like this you can customize or remove our supports.
We already tested and printed this model with a resin printer.
But you can print it with a fdm printer with your own support.
USD 9.99
The Warthog bust.
This is one of the 10 savanna busts we did.
This version is pre supported.
this include also the chitubox file and our config, like this you can customize or remove our supports.
We already tested and printed this model with a resin printer.
But you can print it with a fdm printer with your own support.
USD 7.99
The Warthog bust.
This is one of the 10 savanna busts we did.
This version is not pre supported.
We already tested and printed this model with a resin printer.
But you can print it with a fdm printer.
USD 0.00
You will receive the STL files for Telga. You will also receive a supported version for the STL files for RESIN 3D PRINTING. That means a DLP or SLA printer, not a FDM printer.
We recomand you to use a FDM printer for the basement but it's also pre-supported for resin printer.
All models are already tested and printed by us at 1:12. We place supports for overhangs and for suction force consideration. The pre-supported models are hollowed.
All our supported parts of the models can be printed with a printer like an elegoo mars size.
If you have smaller or bigger printer feel free to use the unsupported files and print them smaller or bigger :D !!!
USD 14.90
You will receive all of the STL files for Telga. You will also receive a supported version for all STL files for RESIN 3D PRINTING. That means a DLP or SLA printer, not a FDM printer.
We recomand you to use a FDM printer for the basement but it's also pre-supported for resin printer
All models are already tested and printed by us at 1:12 scale (around 180mm height). We place supports for overhangs and for suction force consideration. The pre-supported models are hollowed.
All our supported parts of the models can be printed with a printer like the elegoo saturn size, and most of them with an elegoo mars size.
If you have smaller or bigger printer feel free to use the unsupported files and print them smaller or bigger :D !!!
Please update your notification settings if you want to get notified when there is a new comment.