Glarebeast - Halloween 2023 Edition!

All models of this bundle are pre-supported! 

-Tzeekul the Conqueror - 150mm base - 1 pose
-Agama Vanquishers - 50mm base - 4 poses
-Agama Telcoans - 50mm base - 4 poses
-Agama Aztical - 25mm base - 4 poses
-Agama Jungle Scouts - 25mm base - 4 poses
-Agama Ajkin - 25mm base - 4 poses
-Tzeekul the Conqueror - Bust

(Please note that sizes are ballpark figures and not exact measurements)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

All models of this bundle are pre-supported! 

-Astaroth - Archdevil of Wrath - 150mm base - 1 pose
-Maltrixian Devil - 75mm base - 4 poses
-Terebrian Devil - 50mm base - 4 poses
-Agonite Devil - 50mm base - 4 poses
-Varicite Devil - 25mm base - 4 poses
-Rathenites - 25mm base - 4 poses
-Malignants - 25mm base - 4 poses
-Astaroth - Bust

(Please note that sizes are ballpark figures and not exact measurements)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

Includes: 

https://www.myminifactory.com/object/3d-print-149779

https://www.myminifactory.com/object/3d-print-149780

https://www.myminifactory.com/object/3d-print-149781

https://www.myminifactory.com/object/3d-print-149782

https://www.myminifactory.com/object/3d-print-149978

https://www.myminifactory.com/object/3d-print-149979

https://www.myminifactory.com/object/3d-print-149980

https://www.myminifactory.com/object/3d-print-149986

https://www.myminifactory.com/object/3d-print-150098

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

All models of this bundle are pre-supported! 

-Titanoceratus Warband ≈ 100mm base
-Fleshripper, Scion of Ziskal ≈ 100mm base
-Blessed Claws of Ziskal - 3 poses ≈ 100mm base
-Mankutter, Fleshripper Rider ≈ 75mm base
-Mato Riders - 4 poses ≈ 75mm base
-Quetzal Riders - 4 poses ≈ 60mm base
-Acolytes of Ziskal - 3 poses ≈ 60mm base
-High Priest of Ziskal ≈ 60mm base
-Agama Chameleons - 4 poses ≈ 50mm base
-Agama Sundancers - 4 poses ≈ 25mm base
-Blessed Claws of Ziskal - Bust

(Please note that sizes are ballpark figures and not exact measurements)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

All models of this bundle are pre-supported! 

-Treant Lord - 100mm base - 1 pose
-Elder Forest Elemental - 100mm base - 1 pose
-Forest Elementals - 50mm base - 4 poses
-Genirheart Trolls - 50mm base - 4 poses
-Rootals - 50mm base - 4 poses
-Grovebred Druids - 25mm base - 4 poses
-Verdant Ancients - 50mm - 4 poses
-Verdant Ancient - Bust
-Young Treants - 50mm - 2 poses
-Saplings - 25mm base - 2 poses

(Please note that sizes are ballpark figures and not exact measurements)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

All models of this bundle are pre-supported! 

-Aratiel the Golden - 100mm base - 1 pose
-Celtan, favoured of Barachiel - 100mm base - 1 pose
-Astral Gryphon Riders - 75mm base - 4 poses
-Judgement Devas - 50mm base - 4 poses
-Justiciar Angels - Male - 25mm base - 4 poses
-Justiciar Angels - Female - 25mm base - 4 poses
-Ucelot Skywardens - 25mm - 4 poses
-Aratiel the Golden - Bust

(Please note that sizes are ballpark figures and not exact measurements)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

All models of this bundle are pre-supported! 

-Anubis - 100mm base - 1 pose
-Soul Collector Sphinx - 150mm base - 1 pose
-Soul Harvesters - 100mm base - 4 poses
-Anubian Brutes - 50mm base - 4 poses
-Anubian Wardog Riders - 50mm base - 4 poses
-Anubian Priests - 25mm base - 4 poses
-Soulmongers - 25mm base - 4 poses
-Anubis - Bust

(Please note that sizes are ballpark figures and not exact measurements)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

Included in this bundle: (All Pre-Supported) 

• https://www.myminifactory.com/object/3d-print-139681
• https://www.myminifactory.com/object/3d-print-139680
• https://www.myminifactory.com/object/3d-print-139679
• https://www.myminifactory.com/object/3d-print-139678
• https://www.myminifactory.com/object/3d-print-139677
• https://www.myminifactory.com/object/3d-print-139676
• https://www.myminifactory.com/object/3d-print-139675
• https://www.myminifactory.com/object/3d-print-139674
• https://www.myminifactory.com/object/3d-print-139673
  
  

   

   

  Terms of Service

  Pre-supported Files
  Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
  To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

  Intellectual Property
  Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
  Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
  Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
  You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
  You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
  You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
  All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
  Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

All models are pre-supported. 

The Wheel - diorama - roughly 120mm tall (1 pose)
The Ratwatch -  32mm (4 poses)
Slumrat Guerillas - 32mm (4 poses)
The Plague Chanters - 32mm (4 poses)
The Shadow Molars - 32mm (4 poses)
The Executioner - 60mm (1 pose)
The Rat King - 32mm ( 1 pose)
Gallows - 75mm ( 1 pose)
The Broodmother - 75mm (1 pose)
The Blind Bishop - 75mm ( 1 pose)
The Bile Rat - 100mm (2 poses)

*!IMPORTANT NOTE! : all the measurements above are ballpark figures as each model has its own dimensions. 

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

All models of this bundle are pre-supported. 

Dark Elf Adept (32mm) - 2 poses
Dark Elf Oathsworn (32mm) - 2 poses
Dark Elf Archmage (32mm) - 1 pose
Dark Elf Wormling (32mm) - 2 poses
Dark Elf Fighter (32mm) - 3 poses
Dark Elf Swordmaster (32mm) - 1 pose
Dark Elf Neophyte (32mm) - 1 pose
Dark Elf Priestess (32mm) - 2 poses
Dark Elf Matriarch (32mm) - 1 pose
Drokzok Riders (50mm) - 4 poses
Arachnis (50mm) - 4 poses
Arachnis Ascended (100mm) - 1 pose
Nhile, Avatar of Aranis (100mm) - 1 pose

*Important Note: all measurements above are ballpark figures as each model has its own dimensions.

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

All models of this bundle are pre-supported. 

Monometronaut - 1 pose - 200mm base
Stonewurm Rider / Stonewurms - 4/4 poses - 100mm base
War Bjargan - 1 pose - 90mm base including 2 Leadspitters and King Thrag Steelhammer
Steelbreaker Engineers - 4 poses - 25mm base
Steelbreaker Firespitters - 3 poses - 25mm base
Steelbreaker Leadspitters - 2 poses - 25mm base
Steelbreaker Warriors - 5 poses - 25mm base
Steelbreaker Ram Riders - 4 poses - 50mm base
Geomancers - 4 poses - 25mm base
King Thrag Steelhammer - 1 pose - 25mm base
King Thrag Steelhammer (Throne version) - 1 pose

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

▶️Check out our Patreon

All models of this bundle are pre-supported!

-Cerebrax the Devourer - 100mm base - 1 pose
-Elder Brain - 100mm base - 1 pose
-Slithering Devourer - 90mm base - 1 pose
-Outworld Thrall - 70mm base - 1 pose
-Corporeal Reflection - 65mm base - 1 pose
-Encephalid Enlightened - 50mm base - 4 poses
-Encephalid - 36mm base - 5 poses
-Deepspawn - 32mm base - 3 poses (+6 armored)
-Gith Swordmaster - 25mm base - 1 pose
-Encephalid Shocktrooper - 25 base - 3 poses

(Please note that sizes are ballpark figures and not exact measurements)

 
Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport.

All models of this bundle are pre-supported. 

Daughters of Sekhmet (50mm base) - 4 poses
Sons of Sekhmet (50mm base) - 4 poses
Sandmancer Aristocrats (25mm base) - 4 poses
Mau (25mm base) - 4 poses
Golden Scarabs (50mm base) - 4 poses
Mummy Lord (50mm base)
Salahari Sandriders (50mm base) - 4 poses
Pyramid Golem (100mm base)
Sekhmet (100mm base)
Sphynx Cat (25mm base)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

All models of this bundle are pre-supported. 

Asmodeus (160mm base)
Fierna (100mm base)
Azael, Pit Lord (60mm base)
Kartaroths - 4 poses (75mm base)
HellKnights - 4 poses (50x25mm base)
Horned Devils - 4 poses - (50mm base)
Anixorian Devils - 2 poses (50mm base)
Yoronian Devil - 1 pose (50mm base)
Fallen - 3 poses (40mm base)
Hellfire Inquisitors - 4 poses (25mm base)
Phlegethian Imps - 4 poses (25mm base)
Azael Bust

(Please note that sizes are ballpark figures and not exact measurements)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

All models are pre-supported. 

Slaudrul, the Aboleth - 100mm (1 pose)
Morklos - the Trench God base - 75mm (1 pose)
Nautindod, the Shipwreck Golem - 100mm (1 pose)
Chuul - 60mm (3 poses)
Merrows - 60mm (4 poses)
Morloks - 32mm (3 poses)
Morlok Priest - 32mm (1 pose)
Morlok Saboteurs (on Morlok Pouncers) - 32mm (2 poses)
Morlok Pouncers - 50mm (2 poses and alternate weapons)
Morlok Predator - 90mm (1 pose)
Morlok Big Bois - 60mm (4 poses)
Triton Tribe Leaders - 32mm (4 unique minis)

*measurements above are ballpark figures as each model has its own dimensions

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

All models of this bundle are pre-supported! 

-Lilith, the First Blood Daughter - 100mm base - 1 pose
-Lilith, the First Blood Daughter - Bust
-Vladoscar - 100mm base along with Gerasim Rosunescu (rider) - 1 pose
-Vampire Elders - 75mm base - 3 poses
-Batwarg Riders - 50mm base - 4 poses
-Dread Hussars - 50mm base - 4 poses
-Vampire Miasma - 50mm base - 4 poses
-Count Vladimir Rosunescu - 25mm base - 1 pose
-Bloodcloaks - 25mm base - 4 poses
-Daughters of Lilith - 25mm base - 4 poses

(Please note that sizes are ballpark figures and not exact measurements)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

This bundle includes: (All Pre-Supported) 

• https://www.myminifactory.com/object/3d-print-135735
  https://www.myminifactory.com/object/3d-print-135734
  https://www.myminifactory.com/object/3d-print-135736
• https://www.myminifactory.com/object/3d-print-135733
• https://www.myminifactory.com/object/3d-print-135732
• https://www.myminifactory.com/object/3d-print-135731
• https://www.myminifactory.com/object/3d-print-135730
• https://www.myminifactory.com/object/3d-print-135729
• https://www.myminifactory.com/object/3d-print-135728
  
  

   

   

  Terms of Service

  Pre-supported Files
  Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
  To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

  Intellectual Property
  Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
  Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
  Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
  You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
  You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
  You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
  All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
  Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

This bundle includes: (All Pre-Supported) 

• https://www.myminifactory.com/object/3d-print-135511
• https://www.myminifactory.com/object/3d-print-135510
• https://www.myminifactory.com/object/3d-print-135495
• https://www.myminifactory.com/object/3d-print-135494
• https://www.myminifactory.com/object/3d-print-135493
• https://www.myminifactory.com/object/3d-print-135492
• https://www.myminifactory.com/object/3d-print-135491
• https://www.myminifactory.com/object/3d-print-135490
• https://www.myminifactory.com/object/3d-print-135472
  
  

   

   

  Terms of Service

  Pre-supported Files
  Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
  To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

  Intellectual Property
  Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
  Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
  Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
  You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
  You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
  You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
  All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
  Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

The Magma Lords bundle includes the following products - ALL presupported: 

https://www.myminifactory.com/object/3d-print-131344

https://www.myminifactory.com/object/3d-print-130408

https://www.myminifactory.com/object/3d-print-130407

https://www.myminifactory.com/object/3d-print-130406

https://www.myminifactory.com/object/3d-print-130405

https://www.myminifactory.com/object/3d-print-130404

https://www.myminifactory.com/object/3d-print-130403

https://www.myminifactory.com/object/3d-print-130402

And!! Vonindod the Death Titan! (giant robot in the pictures)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

All models of this bundle are pre-supported! 

-Sky Kraken - 150mm base
-Keravnos, Storm Giant King - 100mm base
-Krotos, Storm Giant Orator - 100mm base
-Argonatheus, Storm Giant smith - 100mm base
-Storm Giant Hoplites - 2 poses - 100mm base
-Storm Giant Battlemaidens - 2 poses - 100mm base
-Zulkaz, Storm Troll Boatboss - 1 pose - 50mm base
-Storm Trolls - 3 poses - 50mm base
-Ironstorm Sentinels - 4 poses - 50mm base
-Sky Kraken Acolytes - 4 poses - 25mm base
-Storm Sirens - 4 poses - 25mm base
-Zulkaz, Storm Troll Boatboss - bust

(Please note that sizes are ballpark figures and not exact measurements)~

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

All models of this bundle are pre-supported! 

-Snut - Rat Dragon - 100mm base - 1 pose
-Srelk - Rat Dragon - 100mm base - 1 pose
-Beleaguer - 100mm base - 1 pose
-Pestular - 75mm base - 1 pose
-Rat Reavers - 75mm base - 3 poses
-Dire Rat Cavalry - 50mm base - 4 poses
-Rat Warmongers - 25mm base - 4 poses
-Rat Arbalesters - 25mm base - 4 poses
-Rat Saboteurs - 25mm base - 4 poses
-Onqrin the Rabid - 25mm - 1 pose
-Rat Saboteur - Bust

(Please note that sizes are ballpark figures and not exact measurements)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

All models of this bundle are pre-supported! 

-Akata - 1 pose - 100mm base
-Akata - bust
-Iku - Hyena Dragon - 1 pose - 100mm base
-Gnoll Ettins - 2 poses -75mm base
-Gnoll Slaver - 1 pose - 75mm base
-Claws of Akata - 4 poses - 25mm base
-Gnoll Brutes - 5 poses - 50mm base
-Gnoll Trackers - 4 poses - 50mm base
-Gnoll Scouts - 4 poses - 25mm base

(Please note that sizes are ballpark figures and not exact measurements)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

All models of this bundle are pre-supported! 

-Fionrir - 150mm base - 1 pose
-Juggar Twicefrozen - Mountain Ettin - 75mm base - 1 pose
-Talva - Claw of Winter - 75mm base - 1 pose
-Sligo - Ice Troll King - throne base 75mm - 1 pose
-Owlbears - 50mm base - 3 poses
-Odoben - 50mm base- 4 poses
-Arcturi - Skald, Monk, Barbarians - 50mm base - 4 poses
-Ice Trolls - 50mm base - 4 poses
-Ovis - 25mm base- 4 poses
-Ice Troll - Bust

(Please note that sizes are ballpark figures and not exact measurements)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

All models of this bundle are pre-supported! 

-Karkhareetoth - 150mm base - 1 pose
-Vaiakvo - Sea Dragon - 150mm base - 1 pose
-Shakarkha Juggernauts - 50mm base - 4 poses
-Shakarkha Seadevils - 25mm base - 4 poses
-Shakarkha Tidebringers - 25mm base - 4 poses
-Shakarkha Sharktamers - 50mm base- 4 poses
-Karkhari - 50mm base - 4 poses
-Karkareetoth - Bust

(Please note that sizes are ballpark figures and not exact measurements)

 
Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

The Empire of Sands (ALL Pre-Supported) bundle includes: 

• • The God King - Anubis Version
• • The God King - Undead Version
• • The Sobesksen
• • Sphynx Eternal
• • Cobra Dragon
• • Giant Mummy
• • Undead Royal Guards
• • Mummies

Want our latest releases at a fraction of the cost before they go for sale to the public? Join our Patreon today!

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

This Bundle Also Includes: (All Pre-Supported) 

• https://www.myminifactory.com/object/3d-print-123240
• https://www.myminifactory.com/object/3d-print-123227
• https://www.myminifactory.com/object/3d-print-123236
• https://www.myminifactory.com/object/3d-print-123228
  
  

   

   

  Terms of Service

  Pre-supported Files
  Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
  To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

  Intellectual Property
  Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
  Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
  Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
  You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
  You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
  You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
  All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
  Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

All models of this bundle are pre-supported! 

-Kain the Eternal - 150mm base - 1 pose
-Ghoul Incubator - 150mm base - 1 pose
-Frenzied Bloodspawn - 50mm base - 4 poses
-Sanguinite Ghoul - 25mm base - 4 poses
-Vermilach - 25mm base - 4 poses
-Awakened Ghoul - 25mm base - 4 poses
-Bloodspawn Templar - 25mm base - 4 poses
-Kain the Eternal - Bust

(Please note that sizes are ballpark figures and not exact measurements)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

All models of this bundle are pre-supported! 

-Azalydh Vesperys - Voidblood Harbinger - 75mm base - 1 pose
-Bloodmaw - 75mm base - 4 poses
-Voidblood Vestal - 50mm base - 4 poses - Modular
-Voidblood Loathkin - 25mm base - 4 poses - Modular
-Voidblood Kinhunter - 25mm base - 4 poses - Modular
-Voidbloood Tormutation - 25mm base - 4 poses
-Azalydh Vesperys - Bust

(Please note that sizes are ballpark figures and not exact measurements)

 
Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport.

All models of this bundle are pre-supported! 

-Doge Diodato - 100mm base - 1 pose
-Gondolier of the Black Canal - 75mm base - 4 poses
-Schiavoni - 50mm base - 4 poses
-Mascheraio - 50mm base - 4 poses
-Tosi - 25mm base - 4 poses
-Ruffian Harlequin - 25mm base - 4 poses
-Doge Diodato - Bust

(Please note that sizes are ballpark figures and not exact measurements)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport.

All models of this bundle are pre-supported! 

-Immortal Empress Xi-Qing - 100mm base - 1 pose
-Baonujushe - 75mm base - 4 poses
-Coilsong Savant - 50mm base - 4 poses
-Fangblade Abominal - 50mm base - 4 poses
-Fangblade Sentinel - 25mm base - 4 poses
-Coilsong Siren - 25mm base - 4 poses
-Immortal Empress Xi-Qing - Bust

(Please note that sizes are ballpark figures and not exact measurements)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport.

All models of this bundle are pre-supported! 

-Illyra'vash - The First Harlot - 100mm base - 1 pose
-Anedos - The Lost Grace - 75mm base - 4 poses
-Ordos'Nai - 50mm base - 4 poses
-Marnak'Nai - 50mm base - 4 poses
-Pleasuretorn Subjugators - 50mm base - 4 poses
-Temptresses of Illyra'vash - 25mm base - 4 poses
-Illyra'vash - Bust

(Please note that sizes are ballpark figures and not exact measurements)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport.

All models of this bundle are pre-supported! 

-Bishop Infectus - Weaver of the Pestilent Dream - 100mm base - 1 pose
-Vermigor - 75mm base - 4 poses
-Filth Paladins - 50mm base - 4 poses
-Blackfangs - 50mm base - 4 poses
-Zealots of the Pestilent Dream - 25mm base - 4 poses
-Squeelers - 25mm base - 4 poses
-Vermigor - Bust

(Please note that sizes are ballpark figures and not exact measurements)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport.

All models of this bundle are pre-supported! 

-Scion of Sobek - Aspect of the Black River - 100mm base - 1 pose
-Nektunos - 75mm base - 4 poses
-Akhomani - 50mm base - 4 poses
-Khampsos - 50mm base - 4 poses
-Bahiti Mun - 25mm base - 4 poses
-Atumhos - 25mm base - 4 poses
-Scion of Sobek - Bust

(Please note that sizes are ballpark figures and not exact measurements)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport.

All models of this bundle are pre-supported!

-Harbinger of Gorkal - 100mm base - 1 pose
-Grumlak Riders - 75mm base - 4 poses 
-Heralds of Wrath - 75mm base - 4 poses
-Wrathogar - 50mm base - 4 poses
-Blessed Champions of Gorkal - 50mm base - 4 poses + weapon options)
-Gorkal Wrathenites - 25mm base - 4 poses
-Wrathogar - Bust

(Please note that sizes are ballpark figures and not exact measurements)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport.

All models of this bundle are pre-supported! 

-Atrum Rex - 100mm base - 1 pose
-Arma Tenebris - 50mm base - 4 poses
-Fulgor Mortis - 50mm base - 4 poses
-Morituri - 25mm base - 4 poses
-Tenebris Vessels - 25mm base - 4 poses
-Lapis Erratica - 25mm base - 4 poses
-Ossefacti - 25mm base - 4 poses
-Atrum Rex - Bust

(Please note that sizes are ballpark figures and not exact measurements)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport.

All models of this bundle are pre-supported!

-Kagon Aspect of Demogorgon - 125mm base - 1 pose 
-Teraton Tamareth - 50mm base - 4 poses
-Teraton Vulduk - 50mm base - 4 poses
-Teraton Shumba - 50mm base - 4 poses
-Qyintakla Abominations - 50mm base - 4 poses
-Qyintakla Corrupted Hunters - 25mm base - 4 poses
-Teraton Quasits - 25mm base - 4 poses
-Kagon - Bust

(Please note that sizes are ballpark figures and not exact measurements)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport.

All models of this bundle are pre-supported!

-Valkoinen - Blizzard Dragon - 100mm base - 1 pose (armored and unarmored version)
-Soturi - Herdlord of the Mammuti - 100mm base - 1 pose 
-Mammuti - 50mm base - 4 poses
-Apalumi - 50mm base - 4 poses
-Odoben Doomseekers - 50mm base - 4 poses
-Susimia Icewarg Raider - 50mm base - 4 poses
-Pingvi Scouts - 25mm base - 4 poses
-Soturi - Bust

(Please note that sizes are ballpark figures and not exact measurements)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport.

All models of this bundle are pre-supported!

-Celadren - Lady of the Moon - 100mm base - 1 pose 
-Penumbrus - Moon Herald - 150mm base - 1 pose
-Panselenoi - 50mm base - 4 poses
-Sisters of the Black Moon - 25mm base - 4 poses
-Mages of the Crescent - 25mm base - 4 poses
-Celadren’s Hunters - 25mm base - 4 poses
-Luminae - 25mm base - 4 poses
-Celadren - Bust

(Please note that sizes are ballpark figures and not exact measurements)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport.

All models of this bundle are pre-supported!

-Turtle Hydra - 150mm base - 1 pose
-Grandmother Sin - Wormbinder - 150mm base - 1 pose
-Mother Glutkin - 100mm base - 1 pose 
-Hardibeth - Whisper of the Woods - 75mm base - 1 pose
-Sibyl the Dancer - 50mm base - 1 pose
-Bog Trolls - 50mm base - 4 poses
-Wailwasps - 50mm base - 4 poses
-Rukabak - 50mm base - 4 poses
-Defiled Hagservants - 25mm base - 4 poses
-Hardibeth - Whisper of the Woods - Bust

(Please note that sizes are ballpark figures and not exact measurements)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

All models of this bundle are pre-supported!

-Orcus - 250mm base - 1 pose
-Adramal - Seneschal of Orcus - 150mm base - 1 pose
-Bane demons - 50mm base - 4 poses 
-Bloodhorn Riders - 50mm base - 4 poses
-Demonskulls - 25mm base - 4 poses
-Demonwraiths - 25mm base- 4 poses
-Bodach - 25mm base- 4 poses
-Adramal - Seneschal of Orcus - Bust

(Please note that sizes are ballpark figures and not exact measurements)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

All models are pre-supported.

Armaros, Chaos Incarnate - Roughly 120mm
Essetria, Tamareth War General - Roughly 100mm
Tamareth - 4 poses - Roughly 75mm 
Anzu, Vulduk Scion of Pazuzu - Roughly75mm
Vulduk - 3 poses - Roughly 75mm
Decataur - 4 poses - Roughly 75mm
Kabeiroth - 2 poses - Roughly 75mm
Outworld Vanguard - 4 poses - Roughly 50mm
Outworld Crushers - 3 poses - Roughly 75mm
Muzulk - 4 poses - Roughly 50mm

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (https://www.facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport

All models of this bundle are pre-supported!

-Great Yokai Chiharu - 100mm base - 1 pose
-Jinja Obake - 75mm base - 4 poses 
-Shuten Oni - 50mm base - 4 poses
-Dai Gaikotsu Senshi - 50mm base - 4 poses
-Ire Senshi - 25mm base - 4 poses
-Kemuri-onna - 25mm base - 4 poses
-Sohei Ire - 25mm base - 4 poses
-Dai Gaikotsu Senshi - Bust

(Please note that sizes are ballpark figures and not exact measurements)

Terms of Service

Pre-supported Files
Successfully printing 3D models provided by Archvillain Games is on the end-user. Pre-supported models are not guaranteed to work in every setup or on every printer or with every resin as it is impossible to account for the variance of all combinations of resin, printer, settings, and environment where the print is being produced. Archvillain Games does not bear any liability for print failures during printing files provided by Archvillain Games.
To get help with failed prints of our models or print settings, please comment with your settings, resin, printer, and images of the failed print in our Facebook Group (facebook.com/groups/ArchvillainGames) or our Discord server. Archvillain Games tests and retests prints prior to releasing them to the public to ensure there are no failures inherent in the files. Should a file related issue arise and brought to our attention an update is issued to remedy the discrepancy.

Intellectual Property
Archvillain Games is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to Archvillain Games.
Archvillain Games is the sole owner of the PDF modules. The PDF modules are copyrighted work belonging to Archvillain Games.
Archvillain Games grants you a non-transferable, non-exclusive license to use the files.
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by Archvillain Games alone - see below.
You may not use the resources in mass commercial production, meaning no molds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to Archvillain Games, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of Archvillain Game’s copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with Greek Law 4481/2017 on the Collective Management of IP Rights and Related Rights, Multi-Territorial Licenses for Online Uses Within the Competence of the Ministry of Culture and Sport.