Printrbot Simple Metal Wireguide
Printrbot Simple Metal Wireguide
Published 2020-04-10T14:10:16+00:00
I've had issues with my cables getting in the way especially when moving between short and tall prints. Once, the fan and the probe both tore out and caused me a few hours of frustration!
This is my attempt to help guide the wires in an upward direction and keep the wires away from the extruder.
Was designed using CAD files of the Printrbot Simple Metal so it perfectly snaps into place and lodges itself around the hole for the wiring, the bolt on the housing and the Z shaft for support. Has a openning so the wires can fit in without taking apart your printer and has a support brace against the Z shaft to keep it from moving while printing.
No Support or Adhesion Needed
Quality at 0.3mm or less
Infill set to 15% with average print speed of 80mm/sec on an Ender3 and 60mm/sec on a printrbot simple metal.
Date published | 10/04/2020 |
Time to do | 35 - 36 minutes |
Material Quantity | 7.89 |
Dimensions | 57.26mm x 28.356mm x 44.247mm |
Support Free | YES |