Bigfoot Crossing
Bigfoot Crossing
Published 2015-09-04T14:40:06+00:00
Bigfoot Crossing faux stained glass. Printed on a Solidoodle Press in ABS @.3mm. Print frame in your normal method. You should make a new printing profile for the glass as follows: 2 bottoms,
0 top, 2 perimeters, and infill of your choice. "Glass" is mirrored and prints upside down, flip over after printing and glue into recesses in frame. Faux stained glass stand is also included.
Print the stand with your normal profile.
New printing profile should be used for the "glass" as follows: 2 bottoms, 0 tops, 2 perimeters and infill density and pattern of your choice. "Glass" prints upside down, and is to be flipped over and glued into the recesses in the upright frame.
Date published | 04/09/2015 |
Technology | FDM |
Complexity | Medium |
Support Free | YES |