Replacement Scroll Wheel for Corsair Scimitar (SLA)
Replacement Scroll Wheel for Corsair Scimitar (SLA)
3D
Published 2021-07-14T10:36:34+00:00
This is a replacement scroll wheel for the Corsair Scimitar series of mice (should fit the Scimitar Pro RGB, Scimitar Elite, and possibly others).
For more details, please refer to the article on my website here: https://www.willsthings.com/articles/2021-7-13/fixing-a-broken-scroll-wheel-corsair-scimitar-pro-rgb
Some features are slightly oversized to ensure compatibility with most SLA printers; You may need to do some slight trimming with an Xacto knife, or (wet!) sanding to get a proper smooth fit in your mouse. Be sure to test fit and sand / carve if needed before post-curing!
Must be SLA printed; do not attempt to print on an FDM machine unless you enjoy unending sadness and failure :)
I printed this on an EPAX E6 with EPAX Hard Clear resin at 0.05mm layer height.
Some features are slightly oversized to ensure compatibility with most SLA printers; You may need to do some slight trimming with an Xacto knife, or (wet!) sanding to get a proper smooth fit in your mouse. Be sure to test fit and sand / carve if needed before post-curing!
| Date published | 14/07/2021 |
| Time to do | 90 - 120 minutes |
| Material Quantity | < 5ml |
| Dimensions | 30x30x30 |
