LED Lamp
LED Lamp
Published 2021-09-21T09:01:22+00:00
Hi all, this is my first designed LED Lamp. Running on an wemos D1 Mini with WLED Firmware.
Parts needed:
1. square_1.stl
2. square_2.stl
3. square_3.stl
4. diffusor_1.stl
5. diffusor_2.stl
6. diffusor_3.stl
7. LED Stripe (WS2812B - but u can use any other programmable LED e.g. APA102... i recommend 60 LEDs/m.)
8. Soldering iron
9. Wemos D1 Mini
10.5V Power Adapter (i used it from an old phone, check the amps!)
11. Cable
12. Stand
13. Female and male power jack
14. Resistor ~ 470Ω
You can Download WLED at https://github.com/Aircoookie/WLED
Official Wiki: https://kno.wled.ge/
Youtube tutorial: https://www.youtube.com/watch?v=9d29SBWA4Qs
Printed with 10% infill.
Squares need to be printed with support.
Date published | 21/09/2021 |