26mm Level 3 Menger sponge
26mm Level 3 Menger sponge
Published 2016-03-07T11:13:57+00:00
This design is a slight modification of owens' support-free Menger sponge, with the base sliced off slightly to lie flat on the build platform. (Else a tiny corner sticks down in the center and prints on a tiny layer by itself, making the rest of the model too high off the build platform to be stable.) Used for a printer test of an Afinia H-Series printer with PLA, a MakerBot Mini, an Afinia H-Series printer with ABS, and a MakerBot Replicator 2, shown in that order in the figure above.
MakerHome, Day 357:
http://makerhome.blogspot.com/2014/08/day-357-printer-challenge-26-mm-level-3.html
=====
Twitter: twitter.com/mathgrrl
Hacktastic blog: mathgrrl.com/hacktastic
Shapeways geekhaus store: shapeways.com/shops/mathgrrl
This design and all associated pictures and files are licensed under the Creative Commons Attribution Non-Commercial Share Alike license. If you want to use designs, images, or files outside of the terms of this license, please email request@mathgrrl.com.
Date published | 07/03/2016 |