Chompy, The Filament Shark
901
views
14
downloads
1
collection
0 comments
Loading comments...
Chompy, The Filament Shark
3D
Published 2022-04-11T09:39:46+00:00
6
0
Add to Collection
Description
Chompy, The Filament Shark cuts the ends of your filament leaving a nice 40º shark bite across the end of the filament. Chompy doesn't leave filament ends everywhere, and has a big stomach for holding many filament ends.
When Chompy is full, just lift the (magnetically latched) fin to let it poop all the waste filament into the bin.
This is a relatively simple print. If you can print the card box, this should be easy. No support required.
You can see Chompy in action here: https://www.youtube.com/watch?v=lVJGpDeQzrk
You need:
- 2x 10mmØ x 3mm thick magnets
- 30mm m3 nut and bolt
- 12-16mm m3 nut
- A spring, around 5 - 6.5mm Ø and 15-20mm long.
- A 9mm box cutter blade - available from most hardware stores (e.g., https://www.amazon.com/Amazon-Basics-13-Point-Carbon-Blades/dp/B08D9Q796F).
- A dab of superglue in case the blade is a bit thin and doesn't want to stay in place.
License
Technical Information
Date published | 11/04/2022 |
More Information
Object Parts