Quest3 Gunstock
Quest3 Gunstock
Published 2023-11-27T13:06:52+00:00
This is an easy to print non-magnetic VR gunstock for the Meta Quest3 controllers. The controller holders slide on the stock and can be set at different positions using the removable peg. The centre positions work great for most weapons in Onward, Pavlov, etc.
It has non-magnetic cups: you just slide the controllers out when you need to reload, etc. I found it pretty easy to learn how to do that without seeing them in VR.
This model shares the same base as my Reverb G2 and Pico4 gunstock, so you just need to print the controller holders if you already have one of those.
I used a layer height of 0.2 mm, wall thickness of 1.6 mm, 30% infill. PLA, PLA+, or PETG.
Print the models as situated in the stl for best results.
The controler grip stl (ControllerLBase, ControllerRBase) is angled so it prints with almost no support material. To keep it stable during printing I used a raft and set the support z distance to zero (I just used a brim support and left z at the default 0.2 mm when printing the other parts).
Date published | 27/11/2023 |