Pencil holder
Pencil holder
3D
Published 2024-01-18T12:43:51+00:00
This is a simplistic pencil holder.
I sanded and painted mine (after 3D printing in PLA) to give it a more colorful rendering.
The zip file includes the Fusion 360 file (.f3d), the .stl file and the .3mf file.
Tested for PLA only but can work for other filaments.
I printed mine on a Ender 3 V2 with the following parameters on Cura:
- Layer height : 0.2 mm
- Wall line count : 4
- Bottom layers : 5
- Infill density : 20%
- Infill pattern : ZigZag
- Print speed : 45 mm/s
- Outer wall speed : 22.5 mm/s
- Build Plate Temperature : 60°
- Initial Printing Temperature : 215°
- Printing Temperature : 210°
- Support : yes
- Support overhang angle : 55°
- Support density : 20%
- Combing mode : All
- Retraction distance : 6 mm
- Retration speed : 45 mm/s
This worked for my printer but depending on the precision of yours, parameters might need some finetuning.
| Date published | 18/01/2024 |
| Time to do | 8 - 12 minutes |
| Material Quantity | 82 |
| Dimensions | 94.4x94.4x129.9 |
| Technology | FDM |
