Parakeet Food Dish
2,467
views
82
downloads
1
collection
1 comments
Loading comments...
Parakeet Food Dish
3D
Published 2017-06-28T09:49:18+00:00
3
1
Add to Collection
Description
This is a small food dish for my parakeet. It hangs on the inside of his cage and has a perch for him to use while he eats. I designed this dish in Tinkercad and printed it in PLA using the Cura recommednded settings for fine (0.2mm). I used 50% infil for above normal strength. I used 200 degree nozzle and 60 degree bed (units in Celsius). I suggest using supports because the perch is raised up on the dish. It took about 6.5 hours to print and used about 20 grams of filament. The support material broke away easily and the dish works great. I did drill a small hole in the back side of the dish to secure it to the side of the cage for safety.
Technical Information
Date published | 28/06/2017 |
Time to do | - 390 minutes |
Material Quantity | 20 grams |
Dimensions | 90mm X 30mm X 18mm (dish), 10mm X 6mm (hooks), 20mm by 8mm (perch) |
Technology | FDM |
Complexity | Easy |
More Information
Object Parts