ThinkVision X24-10 VESA mount
This object has been checked for printability, but did not pass the test and was deemed not printable. This object is still shareable and people with this link will be able to see and download the object, so please make sure you watch out and progress with care!
×ThinkVision X24-10 VESA mount
Hi, this is my first project. I'm sorry for that description :).
I wanted to get more space on the table and the first idea was, why ThinkVision does not support VESA...
And it started :)
I made the first model which was added in images for fitting - printed with 10% infill. Watch video, only one screw is screwed.
The second version of the model was attached with rounded corners.
Suggested settings:
Support: YES
Resolution: 0.12 or 0.20
Infill: 60%
Mounting
You need to remove both sides of the monitor handle (left and right - they should be pried along the edge from the foot of the monitor and slide outwards) under which you will see the screws.
Holes for screws:
the original one from the monitor
second the same for VESA 100x100 M4
Status | Rejected |
Time to do | 600 - minutes |
Material Quantity | 110g |
Dimensions | 184.66mm × 180.00mm × 17.88mm |