Dagger for Sand Casting - Metal Casting
This object has been checked for printability, but did not pass the test and was deemed not printable. This object is still shareable and people with this link will be able to see and download the object, so please make sure you watch out and progress with care!
×Dagger for Sand Casting - Metal Casting
This is a model meant for use as a pattern for sand casting.
Its a simple design optimized for 3d printing.
I recommend printing the handle and blade at a very fine layer height (.08 is what I use).
To achieve the highest detail possible I recommend printing the handles horizontally and the blade vertically. The file "Blade Optimized for Vertical Printing" has a brace attached which will allow the blade to be printed successful. The brace needs to be removed after printing.
Make sure to print the blade with 100% infill and the handle with at least 10 bottom layers, 3 walls and 40% infill to prevent warping.
Status | Rejected |
Support Free | YES |