DIY Face Mask
This object has been checked for printability, but did not pass the test and was deemed not printable. This object is still shareable and people with this link will be able to see and download the object, so please make sure you watch out and progress with care!
×DIY Face Mask
Simple DIY mask with flexible filter media options. Three sizes available; small, medium and large. Use string, elastic cord, rubber bands, or other options to secure to head. anchors around the frame are very handy to wrap string around for a snug fit. Mask frame will conform under tension, or can be heated and formed to the face.
Ultimate goal is a low cost, fast printing, simple mask that could be used and discarded.
"Make everything as simple as possible, but not simpler." Einstein
This is a very fast print at 14 minutes for the large sizes. Two larges, three mediums or three smalls can fit on a standard 200mm X 200mm build plate.
ABS and PLA are both acceptable materials to print with.
Note: This mask is not as effective as a N95 HEPA, MERV 16, etc. but this is better than nothing.
Check out this link for more information about Best Materials for Making DIY Masks
https://smartairfilters.com/en/blog/best-materials-make-diy-face-mask-virus/?fbclid=IwAR28ZtZP3utwGHE1hmqXdoeqxgHMpWmtT5lhNYXB1I33hURVa_j-pnDd7jo
Please provide feedback and picture
Solidworks 2020 file is attached :-)
The Solidworks files is open for modifications. All I ask is to reference this design :-)
Update:
3/22/2020 FACE MASK REV2 uploaded
1) Now is three sizes ( Small Medium and Large)
2) Thinner Frame compared to REV1. Frames now contour better to user's face
3) Larger holes to accommodate elastic cord.
4) Solidworks Models are more parametric. Should Allow for better derivatives from community.
3/22/2020 FACE MASK Filter template REV2 uploaded. All Three cutting pattern are in one tool
3/23/2020 Mask in the news https://tribune.com.pk/story/2181993/1-pakistani-volunteers-3d-print-ventilators-join-war-covid-19/
Status | Rejected |
Support Free | YES |