Universal Magnetic Curtain Holder - Reggitenda magnetico universale
Universal Magnetic Curtain Holder - Reggitenda magnetico universale
Published 2020-03-26T14:45:13+00:00
Hi,
Have you evere had that kind of magnetic things that holds up your curtanis? well mine were ugly and broken, so i decided to make another better.
My design needs 2 22mm(4mm thick) round magnets but i also give you the fusion 360 file so you can modify it. I've designed it to be printed in ridgid material(as pla) so the ribbon central part is very thin and bendable with no problem with a little bit of heat(if you do it quickly after printing it is as hot as you need cause of the bed, but hot water will be the same). you can also print it in flexible material. the back of the magnet housing is flat, so you can attach whatever you want to make it a little bit more nice( i prefer my flat and anonimous version)
Printed at 0.22 no supports no raft, took almost 1 hour and 15 minutes to print a couple.
material used AMAZON BASICS PLA Pearl White.
Ciao a tutti
Gianluca - ZioDarK - Magrini
printed in PLA at 0.22 resolution, no raft no support
Date published | 26/03/2020 |
Time to do | 40 - minutes |
Material Quantity | 4,5 grams |
Support Free | YES |