Artemis Class Frigate
This object has been checked for printability, but did not pass the test and was deemed not printable. This object is still shareable and people with this link will be able to see and download the object, so please make sure you watch out and progress with care!
×Artemis Class Frigate
Earth Force Heavy Frigate from the Babylon 5 extended universe.
This model is a modification of the once downloadable from:
http://www.celestiamotherlode.net/catalog/fic_babylon5.php
Babylon 5 hips at this size will have to just follow the rule of cool to get on the xwing board. The Artemis is 652.53 meters long but i scaled mine to about 150mm for printing on a Photon S resin printer.
Scale chart
fighter scale 1/270=252.96mm
Huge/epic scale 1/440=155.36mm
I refit the 10 turret mounts to take 4mm magnets on the surface and fit some rotatable turrets. I don't have a turret available yet but it will be updated in future. The engines have been swapped out to a higher quality Hyperion ones that prints well and the front has been equipped with box mounts to equip metal antennas later if you wish. The bridge module was also swapped out to match the Saturn 8 transport and Hyperion bridge type. The front retro thrusters were also refit to higher detail versions and ribbing on the top hull in front of the bridge was added to match some of the online fan art.
Don't forget to hollow it and you're all set.
Message me if there are any issues and i'll get an update out ASAP.
Print settings:
Resin: Anycubic Eco grey.
Layer: 0.2
Bottom layer: 8
Bottom layer exposure time: 70
normal layer exposure time: 7
Light off delay: 1
Status | Rejected |