Shimano bleed cup
This object has been checked for printability, but did not pass the test and was deemed not printable. This object is still shareable and people with this link will be able to see and download the object, so please make sure you watch out and progress with care!
×Shimano bleed cup
3D
bleed cup for shimano breaks, this works amazingly well. There are 2 versions with the internal diameter as a variable. 2mm and 2.5mm. Depending on your printer abilities you want to print the one with a larger inner diameter so bubbles come out easier, but this means the screw walls will be thinner so I included a 2mm id so the walls will be beefier.
The threads are going to be close enough such that when you screw it in it will deform the thin walls and make it a perfect fit.
Print Settings
Printer brand:
Wanhao
Printer:
Wanhao Duplicator i3 V1
Rafts:
No
Supports:
Yes
Resolution:
0.1
Infill:
100%
Notes:
I printed it with 4 walls, 7 top and 7 bottom layers. The idea is that you don't want infill so always preview to make sure there are no infill.
| Status | Rejected |