Rpi4b Prusa Mk3 Frame Mount Case
This object has been checked for printability, but did not pass the test and was deemed not printable. This object is still shareable and people with this link will be able to see and download the object, so please make sure you watch out and progress with care!
×Rpi4b Prusa Mk3 Frame Mount Case
This case mount is a remix for a Rpi4b of the Rpi3b Prusa Mk3 Frame Mount Case by 3D_Dynamics. It works perfect in the Prusa MK3.
The half hexagon on the end of the arm hooks into the hexagonal cut out on the top of the z axis, and the bottom bolts into the pre-existing threaded holes in the Mk3 Frame. There is lots of clearance behind the case, and some clearance in front of the case even with the heads of the bolts sticking out. This should allow for access to the gpio pins if you choose to wire directly to the einsy board, but I have not tested this.
Required Hardware
-Two m3x10 bolts from spare parts bag to mount the case to the frame. This length will sit flush on the other side of the frame once tightened. -Four m3x18 bolts from spare parts bag to join the two case halves. This length worked well for me, you would be able to get away with other similar lengths if you don't want to use the spare parts bag from Prusa. -Four m3x6ish bolts sourced for mounting the board. Length isn't super important, as long as they are short enough
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.3
Infill:
0.20
Filament_brand:
Hatchbox
Filament_color:
Black
Filament_material:
PLA
Notes:
The Lid/Mount (the half that bolts to the frame) requires support from the build plate in order to print the hexagonal part that inserts into the top of the z axis. Everything else can be printed as is.
Status | Rejected |