DMW-DCC12 DMC-GH3 GH3K DMC-GH4 GH4K DMC-GH5 DMC-GH5S Dummy Battery DC Coupler
This object has been checked for printability, but did not pass the test and was deemed not printable. This object is still shareable and people with this link will be able to see and download the object, so please make sure you watch out and progress with care!
×DMW-DCC12 DMC-GH3 GH3K DMC-GH4 GH4K DMC-GH5 DMC-GH5S Dummy Battery DC Coupler
3D
Dummy Battery / DC Coupler for DMC-GH3 GH3K DMC-GH4 GH4K DMC-GH5 DMC-GH5S. Similar to DMW-DCC12.
It can be assembled with a few M2 X 6 screws. I have made provisions for 5 screws. I have printed them without supports and didn't face any problem.
DC pigtail power cable pairs can be used to build the complete system using a buck converter and a 12V/24V power supply.
I have a GH5S. The official power supply DMW-AC8 specs says 8.4V / 2A. I tried using a buck converter "XL4015 5A DC-DC Step Down Adjustable Power Supply Buck Module" with a 12V 5A power supply. I adjusted the voltage on XL2015 to 8.4V and the camera works. I have also included the files for the XL4015 module case. (The XL4015 case dimensions might not be exact for your module).
This is a work in progress as i would like to test the buck converter for safety properly.
| Status | Rejected |
| Support Free | YES |