Tricky Bricks - Expert Edition
This object has been checked for printability, but did not pass the test and was deemed not printable. This object is still shareable and people with this link will be able to see and download the object, so please make sure you watch out and progress with care!
×Tricky Bricks - Expert Edition
Published 2015-10-09T09:48:46+00:00
This design is for expert players who want more of a challenge. The pattern is only on the inside and in opaque filament so it will be hidden!
Print in clear for a different affect as shown in the images below and learn how you are countering weight OR print opaque for the challenge!
See here for the original version of the product https://www.myminifactory.com/object/tricky-bricks-14024
And check back you Lucia Di Santo's profile for more updates https://www.myminifactory.com/users/Lucia%20Di%20Santo
Remember: It is VERY important to print with 100% density. The blocks in the images had a layer height of 0.15, and to print the entire set takes approx 16 hours. It uses approx. 242g of filament.
Have fun! - but remember - don't knock 'em till you try 'em!!
Remember: It is VERY important to print with 100% density. The blocks in the images had a layer height of 0.15, and to print the entire set takes approx 16 hours. It uses approx. 242g of filament.
Date published | 09/10/2015 |
Time to do | 950 - 960 minutes |
Material Quantity | 242g |
Complexity | Very Easy |
Support Free | YES |