TH-0
TH-0
Published 2021-03-02T17:49:03+00:00
TH0 - The first of nine different designs that I’ll be posting throughout this week and the next. A big shout out again to all of these companies. If you would like the model be sure to search @brianm.taylor on one of these sites @instagram @thingiverse @patreon @shapeways
This model is the culmination of dozens and dozens of iterations. Which is weird considering how the design is so simple haha. It started with FDM printing and I ran into several issues. First, it was too small, then it was too big, then too fragile, too sharp, too round, you get the idea.. but now I’ve got just the right shape and I’m finally ready to share it. Hope you enjoy!
#3dmodel #3dprinting #art #design #resin #product #toy #fidgetspinner #productphotography #video #resinprinting
My suggestion for printing the body of the spinner would be to lay it down flat on the build surface so you can ensure the arms are completely balanced.
For the cap it is best again to print the cup side down so the outer ring is touching the first layer. This will trap some of the resin, but it is the best method for a successful print.
Finally the bearing covers should be printed with the wide end "up" away from the build plate. This just allows you to remove them much more easily.
Date published | 02/03/2021 |
Time to do | 15 - 45 minutes |
Support Free | YES |