Keychains 'Home', 'Bike' & 'Car'
This object has been checked for printability, but did not pass the test and was deemed not printable. This object is still shareable and people with this link will be able to see and download the object, so please make sure you watch out and progress with care!
×Keychains 'Home', 'Bike' & 'Car'
I designed some keychains for home, your bike and your car!
You can also print them non-flexible if you want.
🎞 3D print video: https://youtu.be/qlxG6x6kwqU
⚠ Usage of any models from 3DParts4U will be at your own risk!
⚙ My PolyFlex™ Simplify3D print settings:
- 2200mm/minute (36.7mm/second)
- hotend 220°C | bed 40°C
- 250 micron | infill 15%
- 3 top layers | 3 bottom layers | 3 outline layers
- brass nozzle 0.35mm
- extrusion width 0.40mm
- retraction off
- extrusion multiplier 1.30
- coasting 0.10mm
- wipe distance 1.00mm
- fan 100%
- no support needed
Status | Rejected |
Support Free | YES |