GoPro 'Auto Level/Panorama' Mount
This object has been checked for printability, but did not pass the test and was deemed not printable. This object is still shareable and people with this link will be able to see and download the object, so please make sure you watch out and progress with care!
×GoPro 'Auto Level/Panorama' Mount
Background; I'm new to 3D Printing, don't get my 3D Printer untill January 2016, not too bad on Cubify Design, still learning?
Note:
The File I have uploaded is just the Assembly Drawings, Still Stuggling with File Sizes (success with the single Zipped Assembly STL indicates that), all the Individual Drawing Files will follow when I get the Settings Sorted?
The Mount, I believe has many uses,
1 Auto Level via Camera/s Weight, Pendulum Effect in the Vertical Position
2 Useful for Panoramic Photos or Videos in the Horizontal Position,
3 Multiple Camera Mounting. More than 1 Cradle can be fitted to the Inner Race. Each Cradle can hold 2 Cameras
The cradle/s 'Snap Lock' onto the Inner Race, (Firm Tap, Hopefully),
The 45 hard to print, 6mm, 'Steel' or 'Undrilled Hard Plastic Balls' (Drawing not Included) are easily and cheaply purchased from eBay,
Also required are two 3mm X 10mm Socket Head Screws and Nuts to assemble the 2 Outer Race Halves around the Rollers and Inner Race,
Note; Attach the Cradle to the Inner Race 'first' as it may need a 'Firm Tap'. Set the Cradle on firm Surface while Tapping with Soft Mallet in Centre of (and Not damaging) the Roller Track?
Had trouble (new player) with Zipping etc. so no Images, maybe later.
Geoff
Status | Rejected |