Watch box base
Watch box base
Published 2021-06-24T13:49:14+00:00
I wanted a watch box to store my watches but could not find one, so I modelled my own. I will add pictures once it has finished printing. There will also be some 3D printable watch holders that fit into the slots and a lid. You will have to add hinges to the outside on the back but that shouldn't be too difficult. I added two holes on the top at the front on the lit and the base so you can add magnets to keep the lid closed.
Depending on your printer and print settings it can take anywhere from 16 to 28 hours to print. For me it took 17hours with only about 20% infill and about 4 perimeters.
The more infill and perimeters you have the longer it will take to print but it will be stronger.
You could also buy some thin felt or foam to line the interior and exterior of the box to prevent any of the watches from getting scuffed, scratched or marked.
This is one of my first proper projects so if there are any problem's feel free to contact me or leave a comment and I will try to respond.
Date published | 24/06/2021 |
Technology | FDM |
Support Free | YES |