Wheel of Fortune
Wheel of Fortune
Published 2021-07-23T12:53:59+00:00
Wheel of fortune,
The wheel has been printed in PLA, it uses seven different colours; White, Black, Yellow, White, Blue, Green and red.
Each part to be printed separately.
After printing first press a bearing with the following dimesnsions: 8 mm inner diameter and 22 mm outer diamter. into the yellow part, the "Back_wheel". than press the bearing in the "Wheel_stand". place the wedges into the "Back_wheel" and glue the "Front_wheel onto the "Back_wheel".
Last a piece of papaer can be placed in the top slot of the wheel to act as an arrow.
Printing details:
Wheel_stand: 2 hours 30 min (0,2 mm layer height/30% infill)
Back_wheel: 4 hours 30 min (0,12 mm layer height/20 % infill)
Front_wheel: 1 hour (0,12 mm layer height/20% infill)
Wedge: 15 min for 2 (0,12 mm layer height/20% infill)
Support is needed but only with the "Back_wheel"
Date published | 23/07/2021 |