Ornament Bell 75mm
Ornament Bell 75mm
Published 2021-12-26T09:34:07+00:00
A 3D printable Ornament Bell for Christmas and/or other holidays designed to be printed in “vase” mode in approximately one hour.
The object consists of two parts which can be easily 3D printed, without any support, on a modern inexpensive 3D Printer. The bell is printed in "vase" mode and the hanger is printed normally. The parts can be printed with a variety of materials, including PLA, PETG, ABS, ASA and many other types of printable materials.
Translucent PETG works very well for this application. It is easy to print. The object should be durable, easy to maintain, and last for a long time.
Translucent PLA should work as well as long as the parts will not be used, stored or kept at in a high temperature environment, exceeding ~55 C (~ 130 F).
Recommended print settings with a .4 mm nozzle
Bell
- Layer Height: .2 mm
- 1 perimeter or shells (0.45 to 0.75 mm)
- 0 bottom layers (0 mm)
- 0 top layers (0 mm)
- No Infill
Bell Hanger
- Layer Height: .2 mm
- 2 perimeter or shells (0.45 to 0.5 mm)
- 5 bottom layers (1 mm)
- 1 top layers (1 mm)
- 15 ~ 20% infill
Additional items needed for assembly
- Suitable glue for the filament you are using; i.e.: CA Glue.
Assembly Instructions
1- Apply suitable glue to the bonding area of the “Bell Hanger” and insert in the top of the Bell.
Date published | 26/12/2021 |
Time to do | 63 - minutes |
Material Quantity | 10 grams |
Dimensions | 77 mm x 77 mm x 97 mm |
Technology | FDM |
Support Free | YES |