Sand Worm - Support Free & Pre-Supported
$4.99 Sand Worm - Support Free & Pre-Supported
3D
Published 2022-03-11T09:25:43+00:00
The Sand Worm is a giant beast that can swallow a man whole. Prints support free on FDM in parts and has pre-supported SLA version.
The sand worms of the Menagerie are terrifying creatures that can swallow a humanoid, camels and most giants whole. It is best to stay away from their nesting grounds in the mountains to the north in the Menagerie. Mother can be very protective of the young sand worms and it is best to avoid her at all costs. They have a particular fondness for eating camels and other beasts of burden. If you do encounter a sand worm I have found it is best to tie up a camel as a sacrifice and flee as quickly as you can in the other direction. -Orson Elwood’s journal
Check out our profile for more minis from The Menagerie by Arcane Hound.
FDM: The Sand Worm was designed to print support free for FDM printers they files are cut into two pieces with a square key all will print support free
SLA: All Sand Worm STL files come pre-supported which includes the full Sand Worm and the Sand Worm cut into 3 pieces all keyed to fit on smaller SLA printers.
--PRINTING TIPS--
FDM:
Print on an FDM printer, NO SUPPORTS, 0.2mm height, tested and works great with PLA and PETG.
This was test printed using a 0.2mm layer height quality profile. Smaller layers should work
even better.
SLA: Print using pre-supported files, use your favortie slicer. For larger prints reccommend hollowing out model and be sure to support the hollowed areas,
| Date published | 11/03/2022 |
| Price | $4.99 |
| Support Free | YES |