LOG CABIN BIRDHOUSE
$4.95 LOG CABIN BIRDHOUSE
3D
Published 2022-04-11T15:00:55+00:00
NOTE: FOR COMMERCIAL USE AND SELLING YOUR PRINTS, FULL ACCESS TO ALL MY MODELS AND EXCLUSIVE STLs JOIN MY PATREON:
https://www.patreon.com/PA1_MAKER
FEATURES:
-Very few supports (only on top beam and chimnee)
-All parts are already placed in the right orientation
-Large bottom door for cleaning between seasons
-3 diameters of entrance included: 28.5mm, 32mm, 38.5mm
-Detailed exploded view to help you with the assembly
-Big parts can be done with a layer height of 0.3 with no problem to speed up printing time. (House body on the pictures was made with 0.3 layer height)
-Sturdy and strong design, with thick walls that won't deform overtime.
Be sure to have your bridge settings at "ON".
For the small parts, use 4 walls. This will make a stronger piece.
Watch for over extrusion. If you're having some fitting problems, simply sand gently the parts to help them fit together. But with a good calibration, everything should be fitting together very well.
Can be hang or wall mounted.
This one is very close to the limits of a prusa mk3s bed. It will be ok on a ender 3 bed, but for prusa owners i suggest that you double check all big parts. At least you can scale them down by 1% to help if necessary.
SCALES :
100% - Will use m4 screws.
75% - will use m3 screws.
If you choose to hang it, you have two holes provided on the top beam.
If you have any problems, just send me a message.
Have fun!!!
| Date published | 11/04/2022 |
| Price | $4.95 |