Brick Dice Tower with Fold-Up Wooden Drawbridges
Brick Dice Tower with Fold-Up Wooden Drawbridges
Published 2016-07-28T15:44:21+00:00
Check out our Etsy for all of our 3D printed awesomeness!
https://www.etsy.com/shop/CarryTheWhat
The newest version of the dice tower! This dice tower has extra detail added with brick throughout the tower and wooden grain added on the fold-up drawbridges.
Remixed from garyacrowellsr's 'Remixed Angular Dice Tower, with trays'
This one is a real challenge to print, so make one and test out your printer today!
You'll want to print these at a fairly high resolution (at least .2mm) because of the steep angle and all the detail, otherwise it could be droopy.
Print the following pieces:
1x tower.stl
2x tray.stl
4x pin_1.stl
Snap the pins into the holes on the tray, facing inwards, and then snap the tray to the tower. Repeat on the opposite side, and you're ready to play!
Remixed From
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Date published | 28/07/2016 |
Technology | FDM |